warning AUDI A4 1995 B5 / 1.G 01A Transmission Front Differential Assembly Workshop Manual
[x] Cancel search | Manufacturer: AUDI, Model Year: 1995, Model line: A4, Model: AUDI A4 1995 B5 / 1.GPages: 14, PDF Size: 0.31 MB
Page 10 of 14
39-29
WARNING!
Wear protective gloves.
Note:
Transmission code CXF: use 40-21 sleeve. Fig. 4 Installing right tapered roller bearing inner race
-
Heat inner race to approx. 100 C (212 F), position and install.
Notes: Fig. 5 Removing left tapered roller bearing inner race
A - Two-arm puller, e.g. Kukko 204/2
On a puller with a small spindle diameter, 30-11 thrust pad must be
placed between 447H pressure washer and THE puller. Transmission code CXF: use 40-105 thrust piece.The differential housing has a notch under the bearing seat to install
puller -A-.
Pa
ge 10 of 14 Front final drive differential, disassemblin
g and assemblin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.39.5
Page 11 of 14
39-30
WARNING!
Wear protective gloves.
Note:
transmission code CX: , use 40-21 sleeve. Fig. 6 Installing left tapered roller bearing inner race
-
Heat inner race to approx. 100 C (212 F), position and install.
Fig. 7 Removing left tapered roller bearing outer race from
differential cover
- Turn webs -A- and -B- out until they sit on outer race within recess in
differential cover.
- After removing, check shims for damage.
Pa
ge 11 of 14 Front final drive differential, disassemblin
g and assemblin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.39.5
Page 13 of 14
39-32
WARNING!
Wear protective gloves. Fig. 10 Installing ring gear
- When installing ring gear, guide with centering pins -A- (local
manufacture).
-
Heat ring gear to approx. 100 C (212 F) and install.- Allow ring gear to cool off slightly before inserting bolts.
- Tighten to specified torque.
Fig. 11 Installing differential bevel gears
- Lubricate one-piece thrust washer with transmission oil and install.
- Install large differential bevel gears.
-
Insert small differential bevel gears at 180 from their final position,
and rotate into place (arrow). - Drive small differential bevel gear shaft into final position and secure.
Pa
ge 13 of 14 Front final drive differential, disassemblin
g and assemblin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.39.5