AUDI A4 1995 B5 / 1.G 01A Transmission Shift Linkage Service User Guide

AUDI A4 1995 B5 / 1.G 01A Transmission Shift Linkage Service User Guide https://www.carmanualsonline.info/img/6/1256/w960_1256-0.png AUDI A4 1995 B5 / 1.G 01A Transmission Shift Linkage Service User Guide

Page 11 of 18

AUDI A4 1995 B5 / 1.G 01A Transmission Shift Linkage Service User Guide 34-11
      
Tightening torques  
     
Component  
Tightening 
torque  
Shift mechanism housing to 
body  10 Nm (7 ft lb)  
Shift rod to transmission   23 Nm (17 ft lb)1)  
Pivot rod to transmission

Page 12 of 18

AUDI A4 1995 B5 / 1.G 01A Transmission Shift Linkage Service User Guide 34-12
      
Shift linkage, adjusting
 
     
Requirements  
     
Components of shift mechanism and linkage 
must be in proper working condition 
     Shift mechanism must move freely 
     Transmiss

Page 13 of 18

AUDI A4 1995 B5 / 1.G 01A Transmission Shift Linkage Service User Guide 34-13
      
-  Measure dimension between body opening and 
rear shift rod (in shift mechanism). 
    
If dimension -a- is not attained     Dimension -a-: 37 mm (1.456 in.)
    
-  Loosen bolt for piv

Page 14 of 18

AUDI A4 1995 B5 / 1.G 01A Transmission Shift Linkage Service User Guide 34-14
 
    
-  Loosen ball housing nuts (arrows -A- and -B-).
-  Align ball housing horizontally (item 25),   Page 34
-4 .
-  Tighten ball housing nuts (arrows -A- and -B-).
 
Arrow -A-: 25 Nm (18 ft

Page 15 of 18

AUDI A4 1995 B5 / 1.G 01A Transmission Shift Linkage Service User Guide 34-15
      
-  Align shift lever so it is positioned slightly toward 
rear. 
    
Note:  
The position of the shift lever should not change when bolt is tightened.     Dimension -a- between ball stop

Page 16 of 18

AUDI A4 1995 B5 / 1.G 01A Transmission Shift Linkage Service User Guide 34-16
      
Shift mechanism adjustment, checking
 
     
Requirement  
     
Shift lever must rest in 3rd/4th gear gate 
when transmission is in neutral. 
     
- Operate clutch. 
     
-  Make sure

Page 17 of 18

AUDI A4 1995 B5 / 1.G 01A Transmission Shift Linkage Service User Guide      
-  Check fine adjustment if necessary   Page 34
-
17
 . 
Pa
ge 17 of 18 Shift linka
ge, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.T

Page 18 of 18

AUDI A4 1995 B5 / 1.G 01A Transmission Shift Linkage Service User Guide 34-17
      
Fine adjustment  
      If shift adjustment is not OK, proceed as follows:  
    
Note:  
If only 5th gear and reverse gear cannot be engaged, the 5th and reverse 
gear lock must be check
Page:   < prev 1-10 11-20