engine AUDI A4 1995 B5 / 1.G 01W Transmission Shift Linkage And Servicing Workshop Manual

34-1


Shift linkage, servicing

Notes:

Lubricate bearing areas and slide surfaces with
Polyuric grease G 052 142 A2.
Adjusting shift linkage Page 34
-12
.

To remove the complete shift linkage, remove
the exhaust system.

Repair Manual, Engine Mechanical, Repair
Group 26

To disassemble the shift linkage in the
installation position, the shift mechanism
housing must be lowered.
Pa
ge 1 of 17 Shift linka
ge, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM01.34.1

34-9

- Separate exhaust system behind Three Way
Catalytic Converter (TWC); if necessary remove
front exhaust system together with Three Way
Catalytic Converter (TWC).

Repair Manual, Engine Mechanical, Repair
Group 26
- Remove heat shield.

- Remove shift rod (arrow -A-).
- Remove socket-head bolt on pivot rod (arrow -B-).
- Swing shift mechanism housing together with shift rod and pivot rod
downward and remove.
Pa
ge 9 of 17 Shift linka
ge, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM01.34.1

34-10

Installing
Install in reverse order of removal, noting the
following:

- Push shift rod on so that securing bolt fits into
recess of shift rod.

Repair Manual, Engine Mechanical, Repair Group 26 - Secure shift rod (arrow -A-).
- Secure pivot rod to transmission (arrow -B-).
- Adjust shift linkage Page 34
-12
.
- Install heat shield.
- Align exhaust system free of stress.
Pa
ge 10 of 17 Shift linka
ge, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM01.34.1