gas AUDI A4 1995 B5 / 1.G AEB ATW Engines Turbocharger System Workshop Manual

21-1


Turbocharger system

Note:

Observe rules of cleanliness Page 21
-22
.

Charge air pressure control connection diagram
Page 21
-2 .

All hose connections are secured with hose
clamps:

parts catalog.

charge air pressure system must be free of
leaks.
Replace self-locking nuts.
Always replace gaskets.
Pa
ge 1 of 50 Turbochar
ger s
ystem
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE02.21.1

21-23

Note:

Observe rules of cleanliness Page 21
-22
.

Charge air pressure control connection diagram
Page 21
-2 .

All hose connections are secured with hose
clamps that comply with factory specifications
parts catalog.

Charge air pressure system must be free of
leaks.
Always replace gaskets and self-locking nuts.
Pa
ge 31 of 50 Turbochar
ger s
ystem
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE02.21.1

21-24


Turbocharger, removing, installing and
overview

Part I
1 -
Bolt with collar
40 Nm (30 ft lb)Only use genuine equipment bolts parts
catalog
2 -
Gasket
Always replace
3 -
Three Way Catalytic Converter (TWC)
4 -
Nut Always replace30 Nm (22 ft lb)
5 -
Connection 30 Nm (22 ft lb)
6 -
Connection 35 Nm (26 ft lb)
Pa
ge 32 of 50 Turbochar
ger s
ystem
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE02.21.1

21-26


13 -
Gasket
Always replaceNote installed position
14 -
Coolant return line Union nut tightening torque: 30 Nm (22 ft
lb)
15 -
Nut Always replace25 Nm (18 ft lb)
16 -
Gasket Always replaceNote installed position
17 -
Banjo bolt 25 Nm (18 ft lb)
18 -
Coolant supply line
19 -
Fuse
20 -
Vacuum diaphragm For wastegate
21 -
Bolt 10 Nm (7 ft lb)
Pa
ge 34 of 50 Turbochar
ger s
ystem
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE02.21.1

21-27


23 -
Gasket
Always replace
24 -
Oil return line To oil pan
25 -
Gasket Always replace
26 -
Bolt 10 Nm (7 ft lb)
27 -
Bolt 10 Nm (7 ft lb)
28 -
Nuts 10 Nm (7 ft lb)Install with D 000 600Do not change adjustment
29 -
Turbocharger Check Page 21
-5
30 -
Bolt
45 Nm (33 ft lb)
31 -
Bracket
Pa
ge 36 of 50 Turbochar
ger s
ystem
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE02.21.1

21-30

Turbocharger, removing and installing


Note:
Replace gaskets and self-locking nuts.

Removing

WARNING!
Do NOT open A/C refrigerant circuit. - Remove noise insulation panel (arrows).
- Unbolt A/C compressor.

- Unbolt turbocharger bracket -2-.
- Disconnect oil return line -1- at turbocharger and lay aside.
- Remove air guide ducts -4- and -5- at turbocharger.
- Remove pressure line banjo fitting -3-.
- Disconnect hose from support for charge air pressure regulation valve
vacuum diaphragm.
- Unbolt bracket for coolant supply line at charge air pressure regulation
valve vacuum diaphragm.
Pa
ge 39 of 50 Turbochar
ger s
ystem
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE02.21.1