display AUDI A4 1995 B5 / 1.G AFC Engine Auxiliary Input Signals Checking Workshop Manual

AUDI A4 1995 B5 / 1.G AFC Engine Auxiliary Input Signals Checking Workshop Manual A4 1995 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/1005/w960_1005-0.png AUDI A4 1995 B5 / 1.G AFC Engine Auxiliary Input Signals Checking Workshop Manual

Page 1 of 37

AUDI A4 1995 B5 / 1.G AFC Engine Auxiliary Input Signals Checking Workshop Manual 24-88
 
     
Auxiliary input signals, 
checking 
     
Rear window defroster signal, checking
 
     
Requirement  
     
Engine Control Module (ECM) coding OK   
page 01
-247
 . 
     
Checking

Page 3 of 37

AUDI A4 1995 B5 / 1.G AFC Engine Auxiliary Input Signals Checking Workshop Manual 24-89
       If display value does not change:  
     
-  Switch ignition OFF and connect VAG 1598/19 
test box to ECM harness connector   page 01
-
255
 . 
     
-  Connect VAG 1527B voltage tester b

Page 6 of 37

AUDI A4 1995 B5 / 1.G AFC Engine Auxiliary Input Signals Checking Workshop Manual 24-91
      
Checking  
     
-  Start engine and let idle. 
     
-  Switch A/C on, push "AUTO" button, set 
temperature to "LO" and blower speed to "HI". 
     
A/C compressor symbol must light up a

Page 7 of 37

AUDI A4 1995 B5 / 1.G AFC Engine Auxiliary Input Signals Checking Workshop Manual Read measuring value block 4 1 2 3 4
    
Indicated on display; note value in display field 4  
CAUTION! 
Do not use the shift inputs (identified by an X) during the RPM 
increase check. 
-  Switch on

Page 8 of 37

AUDI A4 1995 B5 / 1.G AFC Engine Auxiliary Input Signals Checking Workshop Manual 24-92
       If the specified values are obtained:  
     
- 
Press  button.     
-  Select "End Output" function 06.
     
-  Press -Q- button to confirm input.
      If display value changes:

Page 10 of 37

AUDI A4 1995 B5 / 1.G AFC Engine Auxiliary Input Signals Checking Workshop Manual 24-93
       If X1X_XX is displayed:  
     
-  Briefly press accelerator pedal to apply wide 
open throttle. 
     
Display must switch briefly to X0X_XX, then 
X1X_XX must appear again after several

Page 12 of 37

AUDI A4 1995 B5 / 1.G AFC Engine Auxiliary Input Signals Checking Workshop Manual 24-94
      
Engine speed (RPM) signal, checking 
 
     
Notes:  
     The RPM signal is routed from the ECM to 
various electronic systems (e.g. automatic 
transmission, ABS, etc.). The RPM signal i

Page 18 of 37

AUDI A4 1995 B5 / 1.G AFC Engine Auxiliary Input Signals Checking Workshop Manual 24-97
      
Vehicle speed signal, checking
 
     
Note:  
     The vehicle speed signal originates from the 
vehicle speed sensor (on the transmission) and 
is routed to the instrument cluster as we

Page 19 of 37

AUDI A4 1995 B5 / 1.G AFC Engine Auxiliary Input Signals Checking Workshop Manual 24-98
       If no vehicle speed is displayed between 
standstill and moving:  
     
-  Switch ignition OFF and connect VAG 1598/19 
test box   page 01
-255
 . 
     
-  Connect VAG 1527B voltage tes

Page 21 of 37

AUDI A4 1995 B5 / 1.G AFC Engine Auxiliary Input Signals Checking Workshop Manual 24-99
      
Transmission Range (TR) selector lever 
position signal, checking
 
     
Note:  
     The Engine Control Module (ECM) uses this 
signal to recognize the transmission range 
selector leve
Page:   1-10 11-20 next >