alternator AUDI A4 1995 B5 / 1.G APB Engine Lubrication System Components Workshop Manual

17-37


- First remove front subframe bolts -2- and -3- (left and right). Then
remove bolts -4-.
- Move anti-roll bar downward.
- Remove charge air cooler -2- on right side (release hose connection at
top, and 3 rubber mountings).

- Remove air duct from connector elbow on alternator -3-.
- Disconnect cable from terminal 30/B+ -1-. Tightening torque: 16 Nm
- Disconnect cable from terminal D+ -2-. Tightening torque: 4 Nm
Pa
ge 39 of 74 Lubrication s
ystem com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE05.17.1

17-38


- Remove hex socket head bolt -1- and securing nut -2-. Tightening
torque: 45 Nm
- Loosen bolt -3-. Tightening torque: 22 Nm.
- Take out alternator -4- from below.

1 - Remove air line -1-.
2 - Mounting for oil line and air conditioner lines
3 - Mounting on cylinder block
4 - Release hose clamp
Pa
ge 40 of 74 Lubrication s
ystem com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE05.17.1