load AUDI A4 1995 B5 / 1.G ATW Engine Ignition System Workshop Manual

28-46
Component location Overview of component
locations Page 24
-5
The Camshaft Position (CMP) sensor provides
the ignition position for cylinder 1.
For failure, knock control is switched off and the
ignition angle is retarded slightly since a cylinder
allocation is no longer possible. In addition, the
boost pressure of the turbocharger is decreased.
Engine will continue to run without Camshaft
Position (CMP) sensor signal and can also be
restarted:

When a malfunction is recognized, the Engine
Control Module (ECM) initiates one ignition
spark per cylinder for each crankshaft rotation.
The offset of one engine rotation will have no
noticeable effect on the injection. Instead of
occurring with intake valves open, injection will
be "pre-loaded" (in front of closed intake valve).
This has only a minor effect on the quality of the
mixture preparation.
Pa
ge 50 of 59 I
gnition s
ystem, checkin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.28.1

28-52


Display fields

1 2 3 4
Display group 014: Misfire recognition
Display xxx /min xxx %
xxx
---
Indicated Engine
speed
(RPM) Load
Number of ignition misfires
Misfire recognition
Functional
range

activated
locked
Specified
value xxxx/min 15 to
33 % 0
activated
Note
If the specified value is exceeded:
Check combustion misfires of
individual cylinders Page 28
-53


If ignition misfires are to be expected due to
operation conditions (e.g. warm-up,
deceleration shut-down), misfire recognition
is deactivated
If specified value is obtained:

-
Press button.Rapid data transfer
HELP
Select function XX

Indicated on display (function selection):
If specified value is not obtained:
- Press -C- button.
Pa
ge 56 of 59 I
gnition s
ystem, checkin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.28.1