automatic transmission AUDI A4 1995 B5 / 1.G AWM Engine Basic Setting Workshop Manual

01-66


Basic setting (function 04)

With ignition on and engine at standstill, the
following operations can be performed using
"function 04", basic setting:

Adapt throttle valve control module to Engine
Control Module (ECM) Display group 060(
Page 24
-125
)

Vehicles with automatic transmission:
Adaptation of kick down function of accelerator
pedal position sensor to ECM Display group
063 ( Page 24
-145
)

With engine running, the following operations
can be performed using basic setting:

Adaptation of oxygen sensor control Page 24
-75

Pa
ge 1 of 5 Basic settin
g (function 04
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU07.01.4

01-67

Test requirements for operations with engine
running:

No DTCs in DTC memory.
Coolant Temperature at least 80 C.

Electrical consumers switched off (radiator
fan must NOT run during test).
A/C switched off.
Vehicles with automatic transmission
Selector lever in P or N.

Test sequence

- Connect VAS5051 tester Page 01
-7 and
select vehicle system "01 - Engine electronics".
Ignition must remain switched on for this.
or, depending on desired operation:

- Start engine.

Display on VAS5051:
- In selection -1-, click on the diagnostic function "04 - Basic setting".
Pa
ge 2 of 5 Basic settin
g (function 04
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU07.01.4