wiring AUDI A4 1995 B5 / 1.G Engine Oil Level Checking Workshop Manual

25


- Remove front bumper Repair Manual, Body
Exterior, Repair Group 63
.
- Undo 3 quick-release fasteners on noise
insulation at front.
- Remove air duct between lock carrier and air
cleaner (air duct is bolted to lock carrier).
- Remove retainer clips (if installed) for wiring
harness to left of radiator cowl.
- Remove bolt -2- on right and thread in special
tool 3369.
Pa
ge 19 of 111 Descri
ption of wor
k
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.ME01.01.6

26


- Thread special tool 3369 into hole -5- (left).
- Remove bolts -1- and -3-.
- Remove bolts -4- and pull whole lock carrier out
as far as it will go.
- Secure lock carrier with suitable M6 bolts in hole
-6- (lock carrier) and hole -7- (fender panel).
- When lock carrier has been installed, check that
wiring next to radiator is correctly routed.
- Install front bumper Repair Manual, Body
Exterior, Repair Group 63
.
Pa
ge 20 of 111 Descri
ption of wor
k
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.ME01.01.6