window AUDI A4 1995 B5 / 1.G Radio OBD Workshop Manual

01-19

Code Control Module (scan tool function
07)

This function is used to code the radio for the
following:
Radio configuration
Sound system
Number of passive loudspeakers
Country identification

Notes:
The coding procedure is used to set the various
radio configuration options.
The coding table only gives the combinations
that are available for the Audi A4.
The term "antenna with remote power supply"
refers to active antennas (e.g. rear window
antennas) which are powered via the HF cable.
The coding must always correspond to the
equipment installed in the vehicle.
Pa
ge 20 of 34 Radio, On Board Dia
gnostic
(OBD
) (m.
y. 1998 [micro]
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE02.01.1

01-29
Display group 003

Read Measuring Value Block 3

Indicated on display

active Antenna OK






Antenna status
OK Short circuit Open circuit

Antenna

Antenna type

Passive
Active (e.g. rear window antenna)

Pa
ge 31 of 34 Radio, On Board Dia
gnostic
(OBD
) (m.
y. 1998 [micro]
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE02.01.1