ABS AUDI A4 1995 B5 / 1.G Suspension Rear Axle Front Wheel Drive Workshop Manual

42-11

- Pull ABS wheel speed sensors out of mounting
holes on both sides.

- Detach ABS wheel speed sensor wiring from
rear axle.

- On vehicles with headlight range control remove
linkage from axle beam.

Note:
Use VAG1383 gearbox lifter together with 1359/2
attachment for removing and installing the axle
beam.

- Unbolt and remove suspension strut from axle beam.
- Remove bolts from guide bushings ( page 42
-2 , items -3- and -5-)
and remove axle beam.
Pa
ge 13 of 26 Rear axle, servicin
g (front-wheel-drive vehicles
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.1

42-12

Installing

- Install axle together with guide bushings into
mounting brackets and install bolts hand-tight.

- Install suspension struts and hand-tighten
suspension strut to axle beam bolts.

- Coat O-ring for ABS wheel speed sensor with
brake cylinder paste.

Repair Manual, Brake System, Repair Group 46

Repair Manual, Brake System, Repair Group 47 - Push ABS wheel speed sensors into wheel bearing housings up to
stop.
- Install locking plates for ABS wheel speed sensors.
- Route parking brake cables and attach to brake calipers.
- Connect brake lines.
- Adjust parking brake:
- Install heat shield.
- Bleed brakes:
Pa
ge 14 of 26 Rear axle, servicin
g (front-wheel-drive vehicles
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.1

42-18


10 -
Outer wheel bearing
Do not wash out if bearing is to be re-used
11 -
Outer wheel bearing outer race Use copper arbor to drive outPressing in Fig. 4Apply small quantity of wheel bearing
grease to wheel bearing seat before
pressing in bearing race
12 -
Brake disc with wheel hub
13 -
ABS wheel speed sensor rotor Drive off evenly using copper arbor through
tapped holes in wheel hub Pressing in Fig. 5
14 -
Inner wheel bearing outer race
Use copper arbor to drive out outer raceApply small quantity of wheel bearing
grease to wheel bearing seat before
pressing in bearing race
Pa
ge 21 of 26 Rear axle, servicin
g (front-wheel-drive vehicles
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.1

42-22


Fig. 5 Pressing in ABS wheel speed sensor rotor

Fig. 6 Pressing in outer race for inner wheel bearing
- Apply small quantity of wheel bearing grease to wheel bearing seat
before pressing in bearing race.
Pa
ge 25 of 26 Rear axle, servicin
g (front-wheel-drive vehicles
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.42.1