engine AUDI A4 1996 B5 / 1.G 01W Transmission Clutch Mechanism Servicing Workshop Manual

30-6


Clutch Pedal Position (CPP) switch -F194-,
removing and installing

Note:
The Clutch Pedal Position Switch (CCP) -F194-
allows the engine to be started only with the clutch
pedal depressed. Introduction 05.97 .
1 -
Mounting bracket
Before removing, remove steering column
from steering gear Repair Manual,
Suspension, Wheels, Steering, Repair
Group 48
2 -
Cable bracket
3 -
Locking clip
4 -
5Pin and locking plate
Latched in clutch pedal
6 -
Clutch pedal Removing and installing Page 30
-4
7 -
Clip
Pa
ge 6 of 16 Clutch mechanism, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM01.30.1

30-11

Clutch master cylinder, removing and
installing


Special tools and equipment
3094 hose clamp

Removing
To remove E-box from plenum chamber:

- Remove bolts (arrows) and remove cover.
- Remove Engine Control Module (ECM); if necessary, remove 8-pin
relay support Repair Manual, Electrical Equipment, Repair Group
97. - Disconnect harness connectors at connector station.
- Remove engine wiring harness together with rubber grommet from
opening in E-box.
Pa
ge 11 of 16 Clutch mechanism, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM01.30.1