battery AUDI A4 1996 B5 / 1.G AEB ATW Engines Cylinder Head Remove And Install Workshop Manual

AUDI A4 1996 B5 / 1.G AEB ATW Engines Cylinder Head Remove And Install Workshop Manual A4 1996 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/949/w960_949-0.png AUDI A4 1996 B5 / 1.G AEB ATW Engines Cylinder Head Remove And Install Workshop Manual

Page 9 of 35

AUDI A4 1996 B5 / 1.G AEB ATW Engines Cylinder Head Remove And Install Workshop Manual 15-10
      
Intake manifold, removing and installing
 
     
Removing  
     
Note:  
     All tie wraps opened or cut during removal must 
be reinstalled at the same locations. 
     
CAUTION!

Page 14 of 35

AUDI A4 1996 B5 / 1.G AEB ATW Engines Cylinder Head Remove And Install Workshop Manual 15-15
      
Installing  
      Installation is the reverse of removal, noting the 
following:  
     
Note:  
     Replace gaskets and O-rings. 
     
-  Adjust Accelerator Pedal (AP) cable.

Page 20 of 35

AUDI A4 1996 B5 / 1.G AEB ATW Engines Cylinder Head Remove And Install Workshop Manual 15-20
      
Cylinder head, removing
 
     
Engine installed 
     Lock carrier in service position   Page 13
-1 
     
Note:  
     
Secure all hose connections with original 
equipment clamps  part

Page 29 of 35

AUDI A4 1996 B5 / 1.G AEB ATW Engines Cylinder Head Remove And Install Workshop Manual 15-28
      
-  Install ribbed belt and ribbed belt tensioner   
Page 13
-15
 . 
     
Note:  
     When installing ribbed belt, make sure it is 
seated correctly on the pulleys. 
     
-  Adjust Acce