AUDI A4 1996 B5 / 1.G AEB ATW Engines Engine Assembly Owner's Guide

AUDI A4 1996 B5 / 1.G AEB ATW Engines Engine Assembly Owner's Guide A4 1996 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/950/w960_950-0.png AUDI A4 1996 B5 / 1.G AEB ATW Engines Engine Assembly Owner's Guide
Trending: belt, light, timing belt, battery, lock

Page 31 of 38

AUDI A4 1996 B5 / 1.G AEB ATW Engines Engine Assembly Owners Guide 13-28
 
    
Thin rib of camshaft gear points outward (arrows) and TDC Cyl. 1 marking 
is visible.  Fig. 1  Installation position for camshaft gear
Pa
ge 31 of 38 En
gine, disassemblin
g and assemblin

Page 32 of 38

AUDI A4 1996 B5 / 1.G AEB ATW Engines Engine Assembly Owners Guide 13-29
      
Toothed belt, removing and installing
 
     
Removing  
     
Engine installed 
     Lock carrier in service position   Page 13
-1 
     
Special tools and equipment  
      V159 pin wre

Page 33 of 38

AUDI A4 1996 B5 / 1.G AEB ATW Engines Engine Assembly Owners Guide 13-30
 
    
-  Remove vibration damper. 
    
-  Remove lower toothed belt cover (arrows).
Pa
ge 33 of 38 En
gine, disassemblin
g and assemblin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
pl

Page 34 of 38

AUDI A4 1996 B5 / 1.G AEB ATW Engines Engine Assembly Owners Guide 13-31
 
    
- 
Using Torx  wrench T45, loosen toothed belt tensioner (lower arrow).-  Push toothed belt tensioner downward.
-  Remove toothed belt. 
Pa
ge 34 of 38 En
gine, disassemblin
g and assembl

Page 35 of 38

AUDI A4 1996 B5 / 1.G AEB ATW Engines Engine Assembly Owners Guide 13-32
      
Installing (adjust valve timing)  
     
Note:  
     
Use the following procedure to adjust toothed 
belt, even for repairs that only require removal 
of toothed belt from camshaft gear.

Page 36 of 38

AUDI A4 1996 B5 / 1.G AEB ATW Engines Engine Assembly Owners Guide 13-33
 
    
-  Tighten toothed belt by turning tensioner -A- to right using 2 pin 
spanner (i.e. Matra V159 pin wrench) until cylinder -1- is fully extended 
and tensioner -2- is raised by approx. 1

Page 37 of 38

AUDI A4 1996 B5 / 1.G AEB ATW Engines Engine Assembly Owners Guide 13-34
 
    
-  Counterhold toothed belt tensioner using 2 pin spanner -B- and tighten 
mounting screw -3-. 
    
Note:  
When installing the ribbed belt, make sure it is seated correctly on the 
pull

Page 38 of 38

AUDI A4 1996 B5 / 1.G AEB ATW Engines Engine Assembly Owners Guide 13-35
      
Tightening torques  
     
Component  
  
Tightening 
torque  
Toothed belt tensioner to 
tensioner assembly    
25 Nm (18 ft 
lb)  
Lower toothed belt cover 
to  
cylinder block  M6   10
Page:   < prev 1-10 11-20 21-30 31-40
Trending: light, belt, battery, lock, timing belt