wheel alignment AUDI A4 1996 B5 / 1.G AFC Engine Cylinder Block Crankshaft And Flywheel Component Assembly Manual

13-12

- Remove left and right toothed-belt guards.

- Remove vibration damper page 13
-10
.

- Remove lower toothed-belt guard.

- Loosen toothed-belt tensioning pulley, and
remove belt.

Installing

Note:
The arms of the puller must engage on the rear hub of the sprocket. - Loosen right and left camshaft sprockets from tapered ends of
camshafts using puller (Kukko 20-10 or equivalent).
- Install toothed belt over both camshaft sprockets first, then over
remaining sprockets, and over tensioning roller last.

Note:
The camshaft sprockets must be loose enough on the tapered ends of the
shafts so that the camshafts can still be turned, but tight enough that the
sprockets do not tilt out of alignment. - Install camshaft holder 3243.
Pa
ge 10 of 32 C
ylinder block, crankshaft and fl
ywheel, com
ponent la
yout
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE01.13.4