lock AUDI A4 1996 B5 / 1.G ATW Engine Read Measuring Value Block Workshop Manual

01-65


Read Measuring Value Block
(function 08)

Test requirements:

Coolant Temperature at least 80 C.

Electrical consumers switched off (radiator
fan must NOT run during test).
A/C switched off.

Test sequence

- Connect VAS5051 tester or VAG1551 scan tool
and select control module for engine electronics
using "address word" 01 Page 01
-10
. Engine
must run at idle.
Rapid data transfer
HELP
Select function XX

When indicated on display
- Press buttons -0- and -8- to select "Read Measuring Value Block" and
press -Q- button to confirm input.
Read measurin
g value block
Q
Enter displa
y group number XXX

When indicated on display
- Enter desired three digit display group number and confirm by pressing
-Q- button.
Pa
ge 1 of 2 Read Measurin
g Value Block
(function 08
)
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.01.7

01-66

Note:
Which display group should be chosen depends
on current function and component tests. Read Measuring Value Block 0 1
2
3
4
5
6
7
8
9
10

Indicated on display for display group 000
Read Measuring Value Block 1 1
2
3
4

Indicated on display (example) for display group 001
Note:
Display can be printed out on the paper roll when printer is switched
on. To switch to a different display group, proceed as follows:
Display group
VAG1551 Scan Tool
VAS5051 tester
Higher Press button -3-
Press button.
Lower Press button -1-
Press button.
Pa
ge 2 of 2 Read Measurin
g Value Block
(function 08
)
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.01.7