dimensions AUDI A4 1996 B5 / 1.G AWM Engine Crankshaft Remove And Install Workshop Manual

13-70


9 -
Sensor wheel
For engine speed sensor -G28-Can only be installed in one position. Holes
are offset Always replace sensor wheel if securing
bolts have been loosened. Removing and installing Fig. 1
,
Page 13
-71

10 -
Crankshaft
Axial clearance new: 0.07 to 00.23 mm,
Wear limit: 0.30 mm Check radial clearance with Plastigage ,
New: 0.02 to 0.04 mm, Wear limit: 0.15 mmDo not rotate the crankshaft when checking
the radial clearance. Crankshaft dimensions Page 13
-76Pa
ge 4 of 12 Crankshaft, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.13.3

13-76

Crankshaft dimensions

(in mm)

Honing
dimension
Crankshaft
bearing
main journal
diameter
Conrod
journal

main journal
diameter
-0.017 -0.022
Basic
dimension 54.00 47.80
-0.037 -0.042
-0.017 -0.022
1st undersize 53.75 47.55
-0.037 -0.042
-0.017 -0.022
2nd undersize 53.50 47.30
-0.037 -0.042
-0.017 -0.022
3rd undersize 53.25 47.05
-0.037 -0.042
Pa
ge 10 of 12 Crankshaft, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.13.3