ECU AUDI A4 1996 B5 / 1.G AWM Engine Cylinder Head Remove And Install Workshop Manual

15-25

- Remove upper toothed belt guard Page 13
-
35
.

- Set crankshaft to markings for TDC of No. 1 cylinder by turning central
bolt on crankshaft sprocket in direction of rotation -arrows-.

- Attach socket head fastener T10092 into tensioner.
- Only tension pressure piston of tensioner until piston is secured with
pin T40011.
- Remove toothed belt from camshaft sprocket.
Pa
ge 28 of 42 C
ylinder head, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.15.1

15-28

Cylinder head, installing


Note:

Always replace the cylinder head bolts.
When performing repairs, replace seals,
gaskets, self-locking nuts and bolts which have
a specified tightening angle.
Secure all hose connections with the correct
hose clips (same as original equipment):

Parts List

If repairing, carefully remove any remains of
gasket material from the cylinder head and
cylinder block. Make sure that no long scores or
scratches are made on the surfaces.
Carefully remove any remaining emery and
abrasive material.
Remove new cylinder head gasket from
packaging, just before installation.
Handle gasket extremely carefully. Damaging
Pa
ge 31 of 42 C
ylinder head, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.15.1