AUDI A4 1996 B5 / 1.G AWM Engine Valve Gear Service Owner's Manual

AUDI A4 1996 B5 / 1.G AWM Engine Valve Gear Service Owner's Manual A4 1996 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/945/w960_945-0.png AUDI A4 1996 B5 / 1.G AWM Engine Valve Gear Service Owner's Manual

Page 21 of 58

AUDI A4 1996 B5 / 1.G AWM Engine Valve Gear Service Owners Manual 15-57
      
Intake camshaft seal, replacing
 
     
Special tools and equipment  
    
Oil seal extractor 2085
    
Installation tool 3241
Pa
ge 21 of 58 Valve 
gear, servicin
g
11/21/2002 htt
p://12

Page 22 of 58

AUDI A4 1996 B5 / 1.G AWM Engine Valve Gear Service Owners Manual 15-58
      
Removing  
     
Cylinder head installed 
     Lock carrier must be in service position   
Page 13
-1 . 
    
-  Remove engine cover -arrows-.
-  Remove upper toothed belt guard   Page 13

Page 23 of 58

AUDI A4 1996 B5 / 1.G AWM Engine Valve Gear Service Owners Manual 15-59
 
    
-  Insert camshaft sprocket bolt 2085/1 by hand into camshaft as far as it 
will go. 
-  Adjust inner part of oil seal extractor 2085 two turns (approx. 3 mm) 
from outer part and lock in

Page 24 of 58

AUDI A4 1996 B5 / 1.G AWM Engine Valve Gear Service Owners Manual 15-60
      
Installing  
     
Note:  
     
Production variations may have the shaft 
sealing rings with ring spring or PTFE sealing 
rings used at the intake camshaft. 
    
Installing PTFE sealing

Page 25 of 58

AUDI A4 1996 B5 / 1.G AWM Engine Valve Gear Service Owners Manual 15-61
      
Installing sealing ring with spring: 
     
Note:  
     Do not oil sealing lip of oil seal. 
    
All models:  -  Place guide sleeve 3241/2 onto camshaft journal.
-  Slide oil seal over

Page 26 of 58

AUDI A4 1996 B5 / 1.G AWM Engine Valve Gear Service Owners Manual Camshaft position sensor housing to cylinder head   10  
Pa
ge 26 of 58 Valve 
gear, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.15.2

Page 27 of 58

AUDI A4 1996 B5 / 1.G AWM Engine Valve Gear Service Owners Manual 15-62
 
  
Camshafts and camshaft adjuster, 
removing and installing
 
Special tools and equipment  
 
Holding tool 3036
 Retainer for chain tensioner 3366
 Tensioning screw T10092
 Guide pin T40011
P

Page 28 of 58

AUDI A4 1996 B5 / 1.G AWM Engine Valve Gear Service Owners Manual 15-63
      
Removing  
     
Cylinder head installed 
     Lock carrier must be in service position   
Page 13
-1 . 
    
-  Remove engine cover -arrows-.
-  Remove combination valve for secondary ai

Page 29 of 58

AUDI A4 1996 B5 / 1.G AWM Engine Valve Gear Service Owners Manual 15-64
 
    
-  Set crankshaft to markings for TDC of No. 1 cylinder by turning central 
bolt on crankshaft sprocket in direction of rotation -arrows-. 
-  Remove cylinder head cover   Page 15
-15
 .

Page 30 of 58

AUDI A4 1996 B5 / 1.G AWM Engine Valve Gear Service Owners Manual 15-65
      
-  Loosen camshaft sprocket (counter hold with 
3036). 
     
- Remove camshaft sprocket.
     
-  Remove camshaft position sensor completely.
    
Note:  
If the retainer for chain tensi