boot AUDI A4 1996 B5 / 1.G Central Locking System Workshop Manual

57-39


Central locking system Assembly overview

1 -
Vacuum line
2 -
Right-front door lock actuator
Removing and installing page 57
-12
3 -
Vacuum line connectors
Disengage harness connectors page 57
-
42

Additional vacuum line connectors are
located at bottom of A-pillar and in boot at
B-pillar
4 -
Right-rear door lock actuator Removing and installing page 58
-14
5 -
Fuel filler flap lock actuator
Removing and installing page 57
-46
6 -
Central locking system pump
Removing and installing page 57
-49
7 -
Distribution box
Connected with all other wires excluding
wire for rear lid
Pa
ge 1 of 11 Central lockin
g system
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD01.57.8

57-44

A-pillar vacuum line connector


- After removing lower A-pillar cover, vacuum line connector -2-
becomes accessible at bottom of A-pillar.
1 - Boot
3 - Line to distribution box
Pa
ge 6 of 11 Central lockin
g system
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD01.57.8

57-45

B-pillar vacuum line connector


Note:
The 45 plug (arrow) must point toward front of vehicle. - Assemble seal -1- with cable slot at bottom.
- After removing boot -2-, vacuum line connector -3- can be removed by
disengaging locking mechanism from line -5-.
Pa
ge 7 of 11 Central lockin
g system
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD01.57.8