AUDI A4 1996 B5 / 1.G Suspension Power Steering Pump Remove And Install User Guide

Manufacturer: AUDI, Model Year: 1996, Model line: A4, Model: AUDI A4 1996 B5 / 1.G
Pages: 20, PDF Size: 0.51 MB
AUDI A4 1996 B5 / 1.G Suspension Power Steering Pump Remove And Install User Guide A4 1996 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/1164/w960_1164-0.png AUDI A4 1996 B5 / 1.G Suspension Power Steering Pump Remove And Install User Guide
Search: (fuel reserve, immobilizer, child restraint, airbag off, fuel pump, tow)
Trending: air bleeding, check engine, clock, ignition
Jump to page (1-20):

Page 11 of 20

AUDI A4 1996 B5 / 1.G Suspension Power Steering Pump Remove And Install User Guide 48-53 Installing power steering pump (power steering pump FP-4) m.y. 1997 - Install pressure line and tighten banjo bolt -2-. Always replace seals Tightening torque: 50 Nm (37 ft

Page 12 of 20

AUDI A4 1996 B5 / 1.G Suspension Power Steering Pump Remove And Install User Guide 48-54 - Install pressure line and tighten banjo bolt -2-. Always replace seals Tightening torque: 50 Nm (37 ft lb) - Install suction hose -1-. - Tighten socket-head bolts for coolan

Page 13 of 20

AUDI A4 1996 B5 / 1.G Suspension Power Steering Pump Remove And Install User Guide 48-55 CAUTION! Note: Illustration is shown without the lock carrier installed for greater clarity. Repair Manual, Body Exterior, Repair Group 63 - Install ribbed belt. Mark the running

Page 14 of 20

AUDI A4 1996 B5 / 1.G Suspension Power Steering Pump Remove And Install User Guide 48-56 Power steering pump (6-cyl. engine), removing and installing Notes: Always replace seals. Do not reuse hydraulic fluid. The power steering system uses hydraulic fluid, Part No. G 0

Page 15 of 20

AUDI A4 1996 B5 / 1.G Suspension Power Steering Pump Remove And Install User Guide 48-57 5 - Belt pulley 6 - Socket-head bolts 25 Nm (18 ft lb)Counterhold using VAG1590 (if applicable) while loosening and tightening 7 - Bolts 25 Nm (18 ft lb) 8 - Socket-head bolts 25 Nm

Page 16 of 20

AUDI A4 1996 B5 / 1.G Suspension Power Steering Pump Remove And Install User Guide 48-58 Removing 15 - Line union 50 Nm (37 ft lb)Vehicles with V6 2V gasoline engineVehicles with power steering pump: FP-3 16 - Clamp Always replaceUse VAG1275 to tighten 17 - Bolts 25 Nm (

Page 17 of 20

AUDI A4 1996 B5 / 1.G Suspension Power Steering Pump Remove And Install User Guide Fig. 2 . Pa ge 17 of 20 Power steerin g pum p, removin g and installin g 11/20/2002 htt p://127.0.0.1:8080/audi/servlet/Dis play?action=Goto&t yp e=re pair&id=AUDI.B5.SU01.48.9

Page 18 of 20

AUDI A4 1996 B5 / 1.G Suspension Power Steering Pump Remove And Install User Guide 48-59 Installing Note: The ignition wires must be correctly reinstalled in the correct firing order Fig. 4 . - Loosen and remove ribbed belt Fig. 3 . - Counterhold belt pulley - 5 -

Page 19 of 20

AUDI A4 1996 B5 / 1.G Suspension Power Steering Pump Remove And Install User Guide 48-60 Fig. 1 Unclipping and removing top engine cover Fig. 2 Unbolting ribbed belt cover Pa ge 19 of 20 Power steerin g pum p, removin g and installin g 11/20/2002 htt p://127.0.0.1:8080

Page 20 of 20

AUDI A4 1996 B5 / 1.G Suspension Power Steering Pump Remove And Install User Guide 48-61 CAUTION! Mark the running direction before removing. Reinstalling a used belt in reversed running direction could damage the belt. Fig. 3 Loosening and removing ribbed belt - Using 1
Page:   < prev 1-10 11-20
Search: (transmission, warning lights, rims, mirror, buttons, rear view mirror)
Trending: check engine, ignition, air bleeding, clock
Jump to page (1-20):