differential AUDI A4 1997 B5 / 1.G 01A Transmission Remove And Install Workshop Manual

34-25


- Remove heat shield for driveshaft from Torsen differential cover
(arrows).

- Remove driveshaft -1- from transmission and rest it on heat shield -2-.
- Secure driveshaft to fuel line bracket -3- using wire (arrow).
Pa
ge 9 of 21 Transmission, removin
g and installin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.34.2

34-37

Component Nm ft
lb
Drive axle to flange shaft M8 40 30
Drive axle to flange shaft M10 80 59
Engine speed sensor -G28- 10 7
Clutch slave cylinder to transmission 20 15
Heat shields over drive axles on
transmission 23 17
Shift rod to transmission 23 17
Pivot rod to transmission 40 30
Driveshaft to transmission 55 41
Heat shield for driveshaft to cover of
Torsen differential 25 18
Three Way Catalytic Converter (TWC)
to mounts 25 18
Front exhaust pipe to turbocharger or
exhaust manifold 25 18
Clamp for exhaust pipe 40 30
Bracket for noise insulation panel to
body 25 18
Pa
ge 21 of 21 Transmission, removin
g and installin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.34.2