display AUDI A4 1997 B5 / 1.G AEB Engine Additional Signal

24-159

- Compare display with specified value in display
field 4:

Display fields

1 2 3 4
Display group 122: Engine torque reduction during shifting
Display xxxx RPM xxx Nm xxx Nm TCS active
Motor enga
Indicates Engine speed
(in 40 RPM
steps) Required engine
torque
(Specified torque) Actual engine
torque
(Actual torque) Timing angle retard active or not active
Range 0-6800 RPM -100 to 410 Nm -100 to 310 Nm ---
Specified
value --- --- --- When shifting, "Motor enga" must be
displayed briefly

--- --- --- If not as specified Page 24
-160

If display is OK (as specified):

-
Press button to advance program
sequence.
- Press buttons -0- and -6- to select "End Output"
function 06, and press -Q- button to confirm
input.
Pa
ge 23 of 29 Additional si
gnals
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.24.5

24-160

Continuation

Note:
The wiring to the Transmission Control Module is
monitored by On Board Diagnostic and stores
the Diagnostic Trouble Code 00545 if there is a
malfunction.
If displayed value is NOT OK (not as specified),
or if DTC 00545 is stored in DTC memory:

- Connect VAG 1598/22 test box to ECM harness
connector Page 01
-56
.

Electrical Wiring Diagrams, Troubleshooting & Component Locations - Check wiring for short circuit or open circuit between ECM harness
connector terminal 23 and to Transmission Control Module (TCM),
according to wiring diagram
Pa
ge 25 of 29 Additional si
gnals
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.24.5