wiring diagram AUDI A4 1997 B5 / 1.G AFC Engine Knock Sensors Checking Workshop Manual
[x] Cancel search | Manufacturer: AUDI, Model Year: 1997, Model line: A4, Model: AUDI A4 1997 B5 / 1.GPages: 6, PDF Size: 0.07 MB
Page 3 of 6
28-30
Checking wiring between knock sensor and
ECM
- Connect VAG 1598/19 test box to ECM harness
connector page 01
-255
.
- Check wiring for continuity or short between
knock sensor and ECM using wiring diagram.
Terminal assignments (inside connector)
Knock Sensor (KS) 1 -G61- 1 - Ground (GND) wire
2 - Signal wire
3 - Shield
- Check signal wire for continuity between harness connector terminal 2
(in engine compartment) and test box socket A13.
Specified value: max. 1 - Check Ground (GND) wire for continuity between harness connector
terminal 1 and test box socket A14.
Specified value: max. 1 - Check shielding for continuity between harness connector terminal 3
(in engine compartment) and engine Ground.
Specified value: max. 1
Pa
ge 3 of 6 Knock sensors, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU01.28.9