steering AUDI A4 1997 B5 / 1.G APB Engine Additional Signals Checking Workshop Manual

24-204

Read measuring value block 126
1
2
3
4

Note:
Display group 126 indicates all other systems that communicate with the
Engine Control Module (ECM) via the CAN-bus. If these systems are not
installed, the display fields that are intended for them will be empty.
The following systems will be indicated in display group 126, assuming
they are communicating with the Engine Control Module (ECM) via the
CAN-bus:
Display field 1: automatic distance control; indication: "Distance 1".
Display field 2: Steering angle sensor; indication: "Steering angle 1"
Display field 3: Airbag; indication: "Airbag 1".
Display field 4: System voltage; indication: "cnt. ELEC 1". - Check under display group 126 in the same manner.
-
Press button.
Rapid data transfer
HELP
Enter address word XX

When indicated on display:
Pa
ge 30 of 37 Additional si
gnals, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.24.6