AUDI A4 1997 B5 / 1.G AWM Engine Assembly Service Manual

AUDI A4 1997 B5 / 1.G AWM Engine Assembly Service Manual A4 1997 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/934/w960_934-0.png AUDI A4 1997 B5 / 1.G AWM Engine Assembly Service Manual

Page 41 of 47

AUDI A4 1997 B5 / 1.G AWM Engine Assembly Service Manual 13-40
      
Toothed belt, removing and installing
 
     
Special tools and equipment  
    
Socket head fastener T10092
    
Pin T40011 
Pa
ge 41 of 47 En
gine, disassemblin
g and assemblin
g
11/21/

Page 42 of 47

AUDI A4 1997 B5 / 1.G AWM Engine Assembly Service Manual 13-41
      
Removing  
     
Engine in vehicle. 
     Lock carrier must be in service position   
Page 13
-1 . 
    
-  Remove engine cover -arrows-.
-  Remove ribbed belt and tensioner for ribbed be

Page 43 of 47

AUDI A4 1997 B5 / 1.G AWM Engine Assembly Service Manual 13-42
      
-  Mark direction of rotation of belt with chalk or felt 
pen. 
    
-  Set crankshaft to markings for TDC of No. 1 cylinder by turning central 
bolt on crankshaft sprocket in direction o

Page 44 of 47

AUDI A4 1997 B5 / 1.G AWM Engine Assembly Service Manual 13-43
 
    
-  Unbolt lower and center section of toothed belt guard -arrows-.
    
-  Attach socket head fastener T10092 into the tensioner for toothed belt.
-  Only tension pressure piston of tensi

Page 45 of 47

AUDI A4 1997 B5 / 1.G AWM Engine Assembly Service Manual 13-44
      
Installing (adjusting valve timing)  
     
Note:  
     
The position of the toothed belt must be set as 
described below, even after repairs in which the 
belt is only taken off the cam

Page 46 of 47

AUDI A4 1997 B5 / 1.G AWM Engine Assembly Service Manual 13-45
 
    
-  Unscrew socket head fastener T10092.
-  Pull out pin T40011 from tensioner.
 
The pressure piston of the tensioner for the toothed belt loosens.
    
-  Turn crankshaft two full turns

Page 47 of 47

AUDI A4 1997 B5 / 1.G AWM Engine Assembly Service Manual 13-46
      
Tightening torques  
     
Component  
  
Nm  
Lower section of toothed belt guard to 
cylinder block    
10 
1)  
Center section of toothed belt guard 
to cylinder block    
10 1)  
Vibr
Page:   < prev 1-10 ... 11-20 21-30 31-40 41-50