battery AUDI A4 1997 B5 / 1.G AWM Engine Cylinder Head Remove And Install Workshop Manual

AUDI A4 1997 B5 / 1.G AWM Engine Cylinder Head Remove And Install Workshop Manual A4 1997 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/933/w960_933-0.png AUDI A4 1997 B5 / 1.G AWM Engine Cylinder Head Remove And Install Workshop Manual

Page 10 of 42

AUDI A4 1997 B5 / 1.G AWM Engine Cylinder Head Remove And Install Workshop Manual 15-9
      
Intake manifold, removing and installing
 
     
Removing  
     
-  Observe or obtain radio anti-theft code on 
vehicles with coded radio. 
     
-  Disconnect Ground strap at battery wit

Page 14 of 42

AUDI A4 1997 B5 / 1.G AWM Engine Cylinder Head Remove And Install Workshop Manual 15-13
      
-  Remove suction hose from flange and 
remove. 
     
Note:  
     Plug intake ports on cylinder head with clean 
cloths. 
     
Installing  
      Installation is carried out in the rev

Page 24 of 42

AUDI A4 1997 B5 / 1.G AWM Engine Cylinder Head Remove And Install Workshop Manual 15-21
      
Procedure  
     
Engine in vehicle 
     Lock carrier must be in service position   
Page 13
-1 . 
     
Note:  
     All cable ties which are released or cut open 
when removing must be

Page 35 of 42

AUDI A4 1997 B5 / 1.G AWM Engine Cylinder Head Remove And Install Workshop Manual 15-31
      
-  Install ribbed belt and tensioner for ribbed belt 
Page 13
-20
 . 
     
- Install intake line   Page 15
-13
 .
     
- Replace coolant   Page 19
-7 .
     
-  After connecting battery

Page 39 of 42

AUDI A4 1997 B5 / 1.G AWM Engine Cylinder Head Remove And Install Workshop Manual 15-34
      
Test conditions:  
     
Engine oil temperature at least 30 C 
     
Battery voltage at least 12.7 V 
     
Test sequence  
    
-  Remove engine cover -arrows-.
-  Switch ignition off.