AUDI A4 1997 B5 / 1.G Climate Control Components In Passenger Compartment Owner's Manual

87-137

Notes for installing:

When installing flap motor, ensure that relay
lever -D- is correctly positioned ( illus. A87
-
0161 on page 87
-136
).

Install strap -A- (on bracket for motor) first into mounting -B- (on
heater/air conditioning assembly). After installing, always check DTC memory page 01
-18
.
Testing -V85- page 01
-42
(output DTM).
Electrical test page 01
-115
.
Wiring harness must be installed so that it does not come in contact
with moving components (e.g. motor linkage). If the crank on the motor is positioned so that the lever can not be
hooked in or the motor can not be installed, connect motor to the
wiring harness, switch on ignition and place lever in appropriate
position by activating the button for air distribution on A/C control head
-E87-.
Pa
ge 21 of 34 Climate control com
ponents in
passen
ger com
partment, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.21

87-138

Temperature regulator flap motor -V68-,
removing and installing (1996)


- Remove footwell air outlet page 87
-134
.

Notes: - Remove 3 screws -A-.
- Separate electrical connection to flap motor ("black" connector
housing).
- Release relay lever -B- and remove flap motor.
- Install in reverse order of removal.
After installing, always check DTC memory page 01
-18
.
When installing flap motor, ensure that relay lever -B- is correctly
positioned. Testing -V68-, output Diagnostic Test Mode (DTM) page 01
-42
.
Electrical test page 01
-115
.
Pa
ge 22 of 34 Climate control com
ponents in
passen
ger com
partment, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.21

87-139

Temperature regulator flap motor -V68-,
removing and installing (1997 )

Remove complete front section of center console
Repair Manual, Body Interior, Repair Group
70


- Loosen floor outlet from the right instrument
panel support page 87
-134
.

Notes for installing: - Identify and mark electrical connectors at flap motor prior to
disconnecting (to prevent mix up) and remove from motor.
- Remove 3 bolts -A-.
- Remove motor and unhook lever -B- (color: red).
After installing, always check DTC memory page 01
-18
.
When installing flap motor, ensure that relay lever -B- is correctly
positioned. Testing -V68- page 01
-42
(output DTM).
Electrical test page 01
-115
.
Wiring harness must be installed so that it does not come in contact
with moving components (e.g. motor linkage).
Pa
ge 23 of 34 Climate control com
ponents in
passen
ger com
partment, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.21

87-140

Central air flap motor -V70-, removing
and installing (1996)


- Remove footwell air outlet page 87
-134
.

Notes: - Remove 3 screws -A-.
- Separate electrical connection to flap motor ("blue" connector housing).
- Release relay lever -B- and remove flap motor.
- Install in reverse order of removal.
After installing, always check DTC memory page 01
-18
.
When installing flap motor, ensure that relay lever -B- is correctly
positioned. Testing -V70-, output Diagnostic Test Mode (DTM) page 01
-42
.
Electrical test page 01
-115
.
Pa
ge 24 of 34 Climate control com
ponents in
passen
ger com
partment, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.21

87-141

Central air flap motor -V70-, removing
and installing (1997 )

Remove complete front section of center console
Repair Manual, Body Interior, Repair Group
70


- Loosen floor outlet from the right instrument
panel support page 87
-134
.

Notes for installing: - Identify and mark electrical connectors at flap motor prior to
disconnecting (to prevent mix up) and remove from motor.
- Remove 3 bolts -A-.
- Remove motor and unhook lever -B- (color: blue).
After installing, always check DTC memory page 01
-18
.
When installing flap motor, ensure that relay lever -B- is correctly
positioned. Testing -V70- page 01
-42
(output DTM).
Electrical test page 01
-115
.
Wiring harness must be installed so that it does not come in contact
with moving components (e.g. motor linkage).
Pa
ge 25 of 34 Climate control com
ponents in
passen
ger com
partment, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.21

87-142

Fresh air/recirculating flap two-way
valve -N63-, removing and installing

Remove glovebox
Repair Manual, Body Interior, Repair Group
70


Notes: - Remove bolt -A-.
- Separate electrical connection.
- Install in reverse order of removal.
Connect vacuum hoses correctly (hose -B- to vacuum reservoir, hose
-C- to vacuum unit). Vacuum hose layout page 87
-184
.
Testing -N63-, output Diagnostic Test Mode (DTM) page 01
-42
.
Electrical test page 01
-115
.
Pa
ge 26 of 34 Climate control com
ponents in
passen
ger com
partment, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.21

87-143

Instrument panel interior temperature
sensor -G56-, removing and installing

Remove radio and center section of instrument
panel complete (trim and supports)
Repair Manual, Radio, Telephone, Navigation,
Repair Group 91
and
Repair Manual, Body Interior, Repair Group
70


Notes:

Check temperature sensor intake -A- and intake hose -C-; air flow
must not be restricted by dust or debris. Temperature sensor -B- is attached to switch mounting; replace
complete unit. Electrical test page 01
-115
.
Pa
ge 27 of 34 Climate control com
ponents in
passen
ger com
partment, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.21

87-144

Sunlight photo sensor -G107-, removing
and installing


Note:
Testing -G107- page 01
-63
. - Carefully pry off cover -A-.
- Remove screw -B-.
- Remove sensor.
- Separate electrical connection.
- Install in reverse order of removal.
Pa
ge 28 of 34 Climate control com
ponents in
passen
ger com
partment, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.21

87-145

Interior temperature sensor fan -V42-,
removing and installing


- Remove lower shelf on passenger side, radio
and center section of instrument panel complete
(trim and supports) Repair Manual, Electrical
Equipment, Repair Group 90 and Repair
Manual, Body Interior, Repair Group 70.

Notes: - Remove 2 screws -A-.
- Remove suction hose -C- and remove blower-B-.
- Install in reverse order of removal.
Check suction hose -C-; air flow must not be restricted by dust or
debris. Testing -V42-, output Diagnostic Test Mode (DTM) page 01
-42
.
Electrical test page 01
-115
.
Pa
ge 29 of 34 Climate control com
ponents in
passen
ger com
partment, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.21

87-146

Air flow flap motor -V71-, removing and
installing (1996)


- Remove heater/air conditioner assembly
complete with instrument panel page 87
-159
.

Notes: - Remove 3 screws -A- and remove flap motor.
- Install in reverse order of removal noting the following.
Markings on the gears of flap motor -B- and air flow flap -C- must be
aligned (longer tooth and continuous tooth intermediate space). If lever of flap motor rests against stop D, the intake shaft through the
air flow flap must be closed when the flap motor is installed (longer
side of air flow flap faces in direction of travel). After installing, check DTC memory page 01
-18
.
Testing V71, output Diagnostic Test Mode (DTM) page 01
-42
.
Electrical test page 01
-115
.
Pa
ge 30 of 34 Climate control com
ponents in
passen
ger com
partment, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.21