wheel bolt torque AUDI A4 1997 B5 / 1.G Suspension Subframe Remove And Install Workshop Manual

40-84

Tightening sequence

CAUTION!

The bonded rubber bushings can only be
turned to a limited extent. The bolted
connections on the suspension links should
therefore only be tightened when the vehicle
is standing on the ground.

-
Tighten bolts -2- and -5- to 110 Nm (81 ft lb) + 1/4-turn (90 ).- Tighten bolts -6- to 75 Nm (55 ft lb).
- Tighten bolts -1- to 23 Nm (17 ft lb).
- Tighten nuts -3- and -4- to 40 Nm (30 ft lb).
- Tighten bolts for lower track control link to 80 Nm (59 ft lb) + 1/4-turn
(90 ). -
Tighten guide link bolts to 90 Nm (66 ft lb) + 1/4-turn (90 ).- Attach coupling link to stabilizer bar using new ribbed nuts and tighten
to 100 Nm (74 ft lb).
- Attach suspension strut to lower track control link.
Tightening torque: 90 Nm (66 ft lb)
- Install ABS wheel speed sensor wiring into retainer on brake caliper.
- Install wheels.
Pa
ge 9 of 15 Subframe, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.40.7