AUDI A4 1998 B5 / 1.G 01V Transmission Read Measuring Value Block E18/2 Owner's Manual
Manufacturer: AUDI, Model Year: 1998, Model line: A4, Model: AUDI A4 1998 B5 / 1.GPages: 42, PDF Size: 0.14 MB
Page 21 of 42
01-244
Display
group
number Display
field Description
Test requirements
Spec. value
on
V.A.G1551
display Corrective actions
004
2
1)
Selector lever
position -
(Multi-function
Transmission Range
(TR) switch -F125-) While
standing,
selector lever
between P
and
R
or
R
and
D Z1
- Check multi-function Transmission
Range (TR) switch -F125-. display
group number 004, display field 3
Between positions at
selector lever
mechanism
N
and
D Z2
- Perform electrical test page 01
-
273
D
and
4 Z3
- If necessary adjust selector lever
bowden cable
Continue
4
and
3
or
3
and Z4 Repair Manual, 5 Spd. Automatic
Transmission 01V, Repair Group 37, shift mechanism, repairing, selector
lever cable, checking and adjusting
Pa
ge 21 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14
Page 22 of 42
2
1) This display field is not displayed until model year 2000 (May 1999)
Note on in-between positions:
When the selector lever is shifted into one of the in-between positions, the Scan Tool indicates "Z1", "Z2", "Z3" or "Z4".
Display in instrument cluster must not indicate a gear selected, i.e. PRND432 is indicated without any particular gear
highlighted.
Pa
ge 22 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14
Page 23 of 42
01-245
Display
group
number Display
field Description
Test requirements
Spec. value
on V.A.G1551
display Corrective actions
004
3 Multi-function
Transmission Range
(TR) switch -F125- While
standing Selector
lever
position
L1 L2 L3 L4 - See DTC table, DTC 17090 /
P0706 page 01
-45
P 1000
- Check multi-function
Transmission Range (TR)
switch -F125-
R 0100
- Perform electrical test page
01
-273
N 1110
D 1011
- If necessary adjust selector
lever bowden cable
4 0111 Repair Manual, 5 Spd.
Automatic Transmission 01V, Repair Group 37, shift mechanism, repairing
Continue
3 0001
2 0010
Pa
ge 23 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14
Page 24 of 42
01-246
Notes for display field 3 of display group number 004:
The input signals of the Multi-function Transmission Range (TR) switch -F125- can be checked at the Transmission
Control Module (TCM).
Display field 3: (from left to right)
L 1 L 2 L 3 L 4
Wiring connection to Transmission Control Module
(TCM) -J217- Terminal 36 of -
J217- Terminal 8
of
-J217- Terminal 37 of -
J217- Terminal 9
of
-J217-
Pa
ge 24 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14
Page 25 of 42
01-247
Display group
number Display
field Description
Test
requirements Spec, value on
V.A.G1551
display Corrective
actions
004
4 Information of On Board
Diagnostic (OBD)
Indicated on display from left
to right While driving
1)
Malfunction display Switched on
1
Switched off 0
Trip Completed 1
Not completed 0 Not applicable
Transmission warm-up
Completed 1
Not completed 0
Engine start
Recognized 1
Not
recognized 0
1) While driving, a second mechanic is required to read specifications.
Pa
ge 25 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14
Page 26 of 42
01-248
Display
group
number Display
field Description
Test requirements
Spec. value on
V.A.G1551
display Corrective actions
005
1 Solenoid valve
1 -N88- While
driving
1) Gear selected
- Check whether display
is the same as on shift
lever display
R. N, D, (1 and 2 (1
gear), Shift-down from
5 to 4 gear X
D (3 and 4 gear) 0
- Perform electrical test
page 01
-273
2 Solenoid valve
2 -N89- While
driving
1) Gear selected
Continue
N, D (1, 2 and 3
gear) X
- Perform electrical test
page 01
-273
R, D (4 and 5 gear) D,
down-shift 5 to 4 0
1) While driving, a second mechanic is required to read specifications.
Notes for display group number 5, display field 1 to 3;
Unswitched solenoid valves (inactive) are indicated with "0", switched solenoid valves (active) are indicated with "1".
Pa
ge 26 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14
Page 27 of 42
01-249
Display
group
number Display
field Description
Test requirements
Spec. value on
V.A.G1551
display Corrective actions
005
3 Solenoid valve
3 -N90- While
driving
1) Gear selected
- See DTC table, DTC
17145/P0761, 17146/P0762 and
17147/P0763 page 01
-45
D (down-shift 5
to 4 gear) X
D (3, 4. and 5
gear) x or 0
2)
- Perform electrical test page
01
-273
R, N, D (1 and
2 gear) 2 (1
gear) 0
4 Gear selected See display group number 001, display field 4 1) While driving, a second mechanic is required to read specifications. 2) The solenoid valve is switched momentarily while driving, meaning that the mode changes from display "0" to "X" and then
again to "0". This switching in these gears is not relevant.
Notes for display group number 5, display field 1 to 3;
Unswitched solenoid valves (inactive) are indicated with "0", switched solenoid valves (active) are indicated with "1".
Pa
ge 27 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14
Page 28 of 42
01-250
Display
group
number Display
field Description
Test
requirements Spec. value on
V.A.G1551
display Corrective actions
006
1 Specified current of Pressure
Control Valve 1 for auto.
transmission -N215- While
driving
1)
- See DTC table, DTC
18222/P1814 and 18223 /
P1815 page 01
-45
min. 0.0 A
- Perform electrical test
page 01
-273
max. 2.0 A
2 Specified current of Pressure
Control Valve 2 for auto.
transmission -N216- While
driving
1)
- See DTC table, DTC
18227/P1819 and 18228 /
P1820 page 01
-45
min. 0.0 A
- Perform electrical test
page 01
-273
Continue
max. 2.0 A
1) While driving, a second mechanic is required to read specifications.
Pa
ge 28 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14
Page 29 of 42
01-251
Display
group
number Display
field Description
Test
requirements Spec. value on
V.A.G1551
display Corrective actions
006
3 Specified current of Pressure
Control Valve 3 for auto.
transmission -N217- While
driving
1)
- See DTC table, DTC
18232/P1824 and 18233 /
P1825 page 01
-45
min. 0.0 A
- Perform electrical test
page 01
-273
max. 2.0 A
4 Not yet applicable
1) While driving, a second mechanic is required to read specifications.
Notes for specified current of solenoid valves:
Faulty solenoid valves or pressure control valves or clutches or other malfunctions can prevent shifting into a specific
gear.
Pa
ge 29 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14
Page 30 of 42
01-252
Display
group
number Display
field Description
Test
requirements Spec. value on
V.A.G1551
display Corrective actions
007
1 ATF temperature See display group number 1, display field 4
2 Specified current of Pressure
Control Valve 4 for auto.
transmission -N218- While
driving
1) min. 0.0 A
- See DTC table, DTC
18237/P1829 and 18238 /
P1830 page 01
-45
max 2.0 A
- Perform electrical test
page 01
-273
3 Torque converter (TC) lock-
up clutch While
driving
1) TC open
- See DTC table, DTC
17125 / P0741 page 01
-
45
Continue
TC control
- Perform electrical test
page 01
-273
TC closed
1) While driving, a second mechanic is required to read specifications.
Pa
ge 30 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14