oil AUDI A4 1998 B5 / 1.G 01W Transmission Input Shaft Workshop Manual

35-3


5 -
Needle bearing
Secured with bolt Fig. 1Driving out Fig. 2Allocation of input shaft/needle bearing
Fig. 3

Installed position Fig. 4Pressing in Fig. 5Securing Fig. 6
6 -
Input shaft
With oiling sleeveDriving in oiling sleeve Fig. 7Adjusting Page 35
-17
Allocation of input shaft/needle bearing
Fig. 3

7 -
Needle bearing for for 3rd gear
Identification
8 -
3rd gear
9 -
Spring Inserting in 3rd gear Fig. 13Allocation of spring to gear parts catalog
10 -
Synchronizer ring for 3rd gear
Pa
ge 4 of 19 In
put shaft, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM01.35.1

35-9


Installed position: Flared edge of oiling sleeve faces tool
Installation depth: 3.5 mm (0.138 in.) below upper edge Fig. 7 Driving in oiling sleeve into input shaftItem
Diameter of oiling sleeve
Tool
A 14 mm (0.551 in.) VW222A pilot drift
B 16 mm (0.629 in.) 30-24 drift

Fig. 8 Pulling out roller sleeve
A - Internal puller 22-28 mm, e.g. Kukko 21/4
Plastic sleeve inside roller sleeve must be destroyed to install internal
puller.
Pa
ge 12 of 19 In
put shaft, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM01.35.1