light AUDI A4 1998 B5 / 1.G 01W Transmission Selector Mechanism Workshop Manual

34-68


Dimension -a- : 1 mm (0.04 in.) Fig. 5 Installation position of sealing washer
- Lubricate sealing lip and dust lip with gear oil.
- Lightly oil outer circumference of seal.

Fig. 6 Installation position of complete selector mechanism in
transmission
1 - Shift fork for 5th and reverse gear
2 - Shift fork for 3rd and 4th gear
3 - Shift fork for 1st and 2nd gear
4 - Relay shaft
5 - Shift detent
6 - Shift rod
Pa
ge 7 of 10 Transmission selector mechanism, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM01.34.5

34-70

Assembling gear lock

- Insert spring -1- into housing -2- and, while applying light pressure, turn
spring to left until it locates in base of housing.
- Insert bushing -3- onto spring so bent end of spring locates into groove
properly.
- Push bushing against spring and turn approximately one turn to left,
until lug on bushing aligns with groove in housing.
- Press lug of bushing into groove in housing onto stop.
- Turn bushing to right and release.
The bushing will spring into the correct position.

Installation position of bushing:
Checking installation position: - Lug (arrow -A-) of bushing must always face away from groove in
housing (arrow -B-).
- Turn bushing to left and release.
The bushing should spring back into position; the lug must be against
the stop (direction indicated by arrow -A-).
Pa
ge 9 of 10 Transmission selector mechanism, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM01.34.5