engine AUDI A4 1998 B5 / 1.G ABS Bosch 5.3 Workshop Manual

45-21

ABS hydraulic control unit, removing
and installing


Note:
When working with brake fluid, observe the
relevant safety precautions and notes Brake
system, bleeding, page 47
-23
.

Special tools and equipment

Sealing plugs from repair kit Part No. 1H0 698
311A
Brake pedal depressor, e.g. from VAG1813

CAUTION!

Part numbers are listed here for reference
only. Always check with your Parts
department for the latest information.
Component location:

The hydraulic control unit is installed on the left side of the engine
compartment.
Pa
ge 4 of 6 Anti-lock Brake S
ystem
(ABS
), Bosch 5.3
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU03.45.3

45-22

Removing

CAUTION!

Do not bend the brake lines.
Before disconnecting the battery, determine
the correct coding for the anti-theft radio.

- Disconnect battery Ground (GND) strap.

Note:
The brake pedal depressor must remain in position until all of the brake
lines have been reconnected to the hydraulic control unit. - Release control unit connector (arrow -1-) and disconnect harness
connector (arrow -2-).
- Connect bleeder bottle to bleeder screw on left-front brake caliper and
open bleeder screw.
- Install brake pedal depressor between brake pedal and driver's seat.
Depress brake pedal by at least 60 mm (2 3/8 in.).
- Close left-front bleeder screw.
- Cover engine compartment to make sure brake fluid does not flow into
it.
- Disconnect brake line connections on hydraulic control unit.
Pa
ge 5 of 6 Anti-lock Brake S
ystem
(ABS
), Bosch 5.3
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU03.45.3