transmission AUDI A4 1998 B5 / 1.G AEB ATW Engines Exhaust System Components Workshop Manual

[x] Cancel search | Manufacturer: AUDI, Model Year: 1998, Model line: A4, Model: AUDI A4 1998 B5 / 1.G
Pages: 35, PDF Size: 0.46 MB
AUDI A4 1998 B5 / 1.G AEB ATW Engines Exhaust System Components Workshop Manual A4 1998 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/951/w960_951-0.png AUDI A4 1998 B5 / 1.G AEB ATW Engines Exhaust System Components Workshop Manual
Search: (oil capacities, homelink, emergency towing, change key battery, ESP, engine overheat)

Page 5 of 35

AUDI A4 1998 B5 / 1.G AEB ATW Engines Exhaust System Components Workshop Manual 26-4 CAUTION! Part numbers are listed here for reference only. Always check with your Parts department for the latest information. 12 - Heated Oxygen Sensor (HO2S) 50 Nm (37 ft lb)Only grea

Page 11 of 35

AUDI A4 1998 B5 / 1.G AEB ATW Engines Exhaust System Components Workshop Manual 26-8 7 - Heated Oxygen Sensor (HO2S) 50 Nm (37 ft lb)Only grease threads with "G 052 112 A3." Do NOT allow grease to get into slots on sensor body Checking Repair Manual, 1.8 Liter 4-Cyl. 5V

Page 17 of 35

AUDI A4 1998 B5 / 1.G AEB ATW Engines Exhaust System Components Workshop Manual 26-12 Fig. 1 Individual mounting components for vehicles with manual transmission 1 - Buffer 2 - Spacer sleeve 3 - Washer 4 - Strap, right 5 - Washer 6 - Bolt (25 Nm/18 ft lb) 7 - Spacer sl

Page 18 of 35

AUDI A4 1998 B5 / 1.G AEB ATW Engines Exhaust System Components Workshop Manual 26-13 Fig. 2 Individual mounting components for vehicles with automatic transmission 1 - Washer 2 - Buffer 3 - Strap 4 - Spacer sleeve 5 - Bolt (25 Nm/18 ft lb) 6 - Bolt 7 - Washer 8 - Comp

Page 29 of 35

AUDI A4 1998 B5 / 1.G AEB ATW Engines Exhaust System Components Workshop Manual 26-22 - Remove air guide duct between cowl and air cleaner housing. - Remove air cleaner housing cover. - Remove the following lines/harness connectors: 1 - At wastegate bypass

Page 30 of 35

AUDI A4 1998 B5 / 1.G AEB ATW Engines Exhaust System Components Workshop Manual 26-23 Installing Installation is the reverse of removal, noting the following: Only grease threads of oxygen sensor with "G 052 112 A3." Do NOT allow grease to get into slo
Search: (transmission fluid, 4WD, maintenance reset, center console, oil viscosity, buttons)