AUDI A4 1998 B5 / 1.G AFC Engine Assembly User Guide

AUDI A4 1998 B5 / 1.G AFC Engine Assembly User Guide A4 1998 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/975/w960_975-0.png AUDI A4 1998 B5 / 1.G AFC Engine Assembly User Guide

Page 11 of 20

AUDI A4 1998 B5 / 1.G AFC Engine Assembly User Guide 10-8
      
-  Unbolt hydraulic pump from mounting bracket.
     
CAUTION! 
     
Hydraulic lines should remain connected. 
     
-  Unscrew bolts and secure A/C compressor to 
one side with wire.

Page 12 of 20

AUDI A4 1998 B5 / 1.G AFC Engine Assembly User Guide      
-  Remove starter, take off insulator at starter 
positive (B+) connection, unbolt fixture at engine 
block, disconnect ground wire from engine 
support. 
     
-  Unscrew four engine mounting b

Page 13 of 20

AUDI A4 1998 B5 / 1.G AFC Engine Assembly User Guide 10-9
      
-  Support weight of transmission using engine 
support bridge 10-222A. 
    
-  Attach engine support adapter 3147 to bolt hole of transmission bell 
housing. 
   (Adapter installation sh

Page 14 of 20

AUDI A4 1998 B5 / 1.G AFC Engine Assembly User Guide 10-10
      
Mounting engine cylinder block on assembly 
stand  
    
CAUTION! 
DO NOT have the cylinder block mounted to the assembly stand 
while measuring the cylinder bores (Repair Group 13). The

Page 15 of 20

AUDI A4 1998 B5 / 1.G AFC Engine Assembly User Guide 10-11
      
Installing
 
      The engine is installed in the reverse order of 
removal, with the addition of the following special 
conditions and steps:  
     
WARNING! 
     
Do not re-use any fa

Page 16 of 20

AUDI A4 1998 B5 / 1.G AFC Engine Assembly User Guide -  Clean transmission input shaft splines. Lightly 
lubricate clutch release bearing and 
transmission input shaft splines with G 000 100 
grease. Do not grease guide sleeve for release 
bearing.

Page 17 of 20

AUDI A4 1998 B5 / 1.G AFC Engine Assembly User Guide 10-12
      
-  Allow stop of torque support to move down onto 
rubber block under its own weight; tighten bolts 
to 45 Nm (33 ft lb). 
     
-  Align exhaust system free of stress   Repair 
Group 26.

Page 18 of 20

AUDI A4 1998 B5 / 1.G AFC Engine Assembly User Guide      
-  Observe tightening torque specifications.
Pa
ge 18 of 20 En
gine, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE01.

Page 19 of 20

AUDI A4 1998 B5 / 1.G AFC Engine Assembly User Guide 10-13
      
Tightening torques
 
     
Notes:  
     
The tightening torques apply only to lightly 
greased, oiled, plated or specially treated nuts 
and bolts. 
     It is permissible to use additio

Page 20 of 20

AUDI A4 1998 B5 / 1.G AFC Engine Assembly User Guide Nm   lb)  
Torque converter to drive 
plate   M8   35 
Nm  (26 ft 
lb)  
Engine support to engine 
mount  M10   45 
Nm    
Viscous coupling to 
bracket  M10   45 
Nm  (33 ft 
lb)  
Hydraulic pump to b
Page:   < prev 1-10 11-20