transmission AUDI A4 1998 B5 / 1.G AFC Engine Fuel Supply System Components Workshop Manual

20-14


Installation position of stop buffer
Identification:
HS - Manual transmission
AG -Automatic transmission
Marking -HS- or -AG- must be readable

Attachment of cable sleeve
- Push throttle cable through engine compartment bulkhead.
- Push cable attachment into bulkhead and turn counterclockwise
approx. 90 .
Pa
ge 21 of 24 Fuel su
pp
ly system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE01.20.1

20-15

Accelerator pedal cable, adjusting


CAUTION!

The accelerator pedal cable is easily
damaged (kinked) and therefore must be
handled carefully.
A single slight kink can lead to cable failure
while the vehicle is being driven.
A KINKED CABLE MUST NOT BE
INSTALLED.
When installing the cable, make sure that it is
aligned between its supporting mounts and
the attachment points.

- Pull off cable locking plate at throttle body.

- Depress accelerator pedal to wide open throttle
position.

Note:
A second person is required for this step.
Vehicles with manual transmission
Pa
ge 22 of 24 Fuel su
pp
ly system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE01.20.1

- Pull cable sleeve away from cam at throttle body
until throttle valve has opened fully, then hold
tight in this position.
Vehicles with automatic transmission

- Pull cable sleeve back toward wide open throttle
position until throttle valve is fully open and
kickdown switch is actuated (clicks), then hold
tight in this position.
Pa
ge 23 of 24 Fuel su
pp
ly system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE01.20.1