remove seats AUDI A4 1998 B5 / 1.G Airbag Service Workshop Manual

69-75


Side airbag, removing and installing

WARNING!
Removing
Follow all safety precautions when working
on airbags page 69
-40
.
Before starting work on seats, connect
VAS5094 airbag adapter page 72
-9 .
- Disconnect battery Ground (GND) strap.
- Remove seat page 72
-2 .
- Remove outer trim pieces and trim on side of
seat page 74
-16
.
- Remove harness connector -2-.
- Disconnect Ground (GND) strap from harness
connector -2-, chamber 4.
- Disconnect harness connector for side airbag -1-
from connector strip -5- by pressing on retaining
tab.
Pa
ge 44 of 75 Airba
gs, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.69.3

69-79

Side airbag unit, removing and installing


WARNING!

Before starting work on seats, connect
VAS5094 airbag adapter page 72
-9 .

Removing

WARNING!
Note:
Illustration is shown without anti-crush fleece. - Remove bolts -2- (2x).
Do NOT reuse bolts -2-. Replace the metal bolts with M5 bolts and
nuts supplied. Drill mounting holes to 5.5 mm.Tightening torque: 5.5 Nm (49 in. lb)
- Carefully disconnect side airbag -1- at retaining clip -5-.
- Remove side airbag -1-.
- Place airbag unit on appropriate surface with impact padding facing up.
Pa
ge 48 of 75 Airba
gs, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.69.3

69-81


Side airbag for Recaro seat, removing and
installing

WARNING!

Follow all safety precautions when working
on side airbag.
Before starting work on seats, connect
VAS5094 airbag adapter page 72
-9 .
1 -
Backrest
2 -
Side airbag unit
Removing:
- Remove Recaro seat page 72
-25
.
- Remove mounting trim page 72
-41
.
- Disconnect yellow airbag harness
connector under seat.
- Disconnect black Ground (GND) harness
connector for airbag, located under seat.
- Unbolt bolt -4- on retainer -6- on
underside of side airbag unit -2-.
- Push side airbag unit -2- downward.
- Carefully pull out side airbag unit -2-.
Pa
ge 50 of 75 Airba
gs, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.69.3

69-83

Seat occupant sensor, removing and
installing


WARNING!

Before starting work on seats, connect VAS
5094 airbag adapter page 72
-9 .

Note:
The seat occupant sensor will be used at a later
time.

Note:
Sensor mat is only available as a replacement part which includes seat
heater and seat cushion. - Removing seat page 72
-2 .
- Remove seat cover page 74
-15
.
- Press retaining tabs -3- and disconnect connector -1- for seat occupant
sensor from connector strip -4-.
- Disconnect Ground (GND) strap from harness connector -1- (location -
4-).
- Unclip harness connector -5- and disconnect intermediate connector to
backrest.
- Remove seat cushion along with sensor mat and seat heater from seat
pan.
Pa
ge 53 of 75 Airba
gs, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.69.3