relay AUDI A4 1998 B5 / 1.G APB Engine Motronic Syst
[x] Cancel search | Manufacturer: AUDI, Model Year: 1998, Model line: A4, Model: AUDI A4 1998 B5 / 1.GPages: 166, PDF Size: 0.53 MB
Page 11 of 166

01-9
      
Vehicle diagnostic, testing and 
information system VAS5051 or 
VAG1551, connecting and selecting 
functions
 
     
Requirements  
     
Fuses for engine electronics OK 
     Fuel pump relay OK 
     Battery voltage at least 11 V 
     Ground (GND) connection for engine and 
transmission OK 
     
-  Switch ignition off.
    
Note:  
The Data Link Connector (DLC) is located below the dash, to the left of 
the steering column.  -  Connect vehicle diagnostic, testing and information system VAS5051 
with VAS5051/1 diagnostic cable. As an alternative, connect VAG1551 
scan tool with VAG1551/3B diagnostic cable. 
Pa
ge 11 of 166 Motronic s
ystem, On Board Dia
gnostic 
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1 
Page 66 of 166

01-55
 
DTC  
Description of 
malfunction  
Corrective action  
SAE  
VAG  
  
  
P1432   17840   Sec. Air Inj.Valve  
Open 
2)  
 Repair Manual, 2.7 Liter V6 5V BiTurbo Engine Mechanical, Engine Code(s): 
APB, Repair Group 26, Exhaust system, Secondary air injection system, Checking Secondary Air Injection (AIR) Solenoid Valve 
-N112
    - Check Secondary Air Injection (AIR) Solenoid Valve -N112
P1433   17841   Sec. Air Inj. Sys. 
Pump Relay Circ.  
Open 
2)   Repair Manual, 2.7 Liter V6 5V BiTurbo Engine Mechanical, Engine Code(s): 
APB, Repair Group 26, Exhaust system, Secondary air injection system, Checking Secondary Air Injection (AIR) Pump Relay 
-J299
   
P1434   17842   Sec. Air Inj. Sys. 
Pump Relay Circ.  
Short to B+ 
2)    
P1435   17843   Sec. Air Inj. Sys. 
Pump Relay Circ.  
Short to Ground 
2)    
2) With this malfunction the exhaust Malfunction Indicator Light (MIL) is only switched on by the ECM, if the malfunction is 
recognized after the engine has been restarted. Significance of MIL   Page 01
-3 .  
Pa
ge 66 of 166 Motronic s
ystem, On Board Dia
gnostic 
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1 
Page 73 of 166

01-61
 
DTC  
Description of malfunction  
Corrective action  
SAE  
VAG  
  
  
P1500   17908   Fuel Pump Relay Circ.  
Electrical Malfunction 
2)  - Check Fuel Pump (FP) relay   Page 24
-33
P1501   17909   Fuel Pump Relay Circ.  
Short to ground 
2)    
P1502   17910   Fuel Pump Relay Circ.  
Short to B+ 
2)    
2) With this malfunction the exhaust Malfunction Indicator Light (MIL) is only switched on by the ECM, if the malfunction is 
recognized after the engine has been restarted. Significance of MIL   Page 01
-3 .  
Pa
ge 73 of 166 Motronic s
ystem, On Board Dia
gnostic 
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1 
Page 93 of 166

01-76
      
The DTM activates the following components 
in the stated sequence: 
     
Activation sequence  
1.   EVAP Canister Purge Regulator Valve -
N80-  
2.   Secondary Air Injection (AIR) Solenoid 
Valve -N112-  
(This display appears only on vehicles with 
automatic transmission)  
3.   Secondary Air Injection (AIR) Pump Relay -
J299-  
(This display appears only on vehicles with 
automatic transmission)  
4.   Wastegate Bypass Regulator Valve -N75  
5.   Camshaft adjustment  
6.   Leak Detection Pump for EVAP system  
7.   Recirculating valve for turbocharger -N249  
8.   Cylinder 1 Fuel Injector -N30  
9.   Cylinder 4 Fuel Injector -N33  
10.   Cylinder 3 Fuel Injector -N32  
11.   Cylinder 6 Fuel Injector -N84  
12.   Cylinder 2 Fuel Injector -N31  
Pa
ge 93 of 166 Motronic s
ystem, On Board Dia
gnostic 
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1 
Page 95 of 166

01-77
      
Test requirements  
     
Fuses for engine electronics OK 
     Fuel pump relay OK 
     
-  Connect vehicle diagnostic, testing and 
information system VAS 5051 or VAG1551 scan 
tool and select engine electronics control 
module by entering address word "01"   Page 01
-9 . When doing this the ignition must be 
switched on. 
Rapid data transfer 
HELP
Select function XX
    
Indicated on display  
-  Press buttons -0- and -3- to select function "Output Diagnostic Test 
Mode." 
Rapid data transfer 
Q
03 - Output Dia
gnostic Test Mode
    
Indicated on display  
Pa
ge 95 of 166 Motronic s
ystem, On Board Dia
gnostic 
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1 
Page 97 of 166

01-79
      
Actuating Secondary Air Injection (AIR) 
Solenoid Valve -N112  
     
Note:  
     Only vehicles with automatic transmission are 
equipped with a secondary air injection system. 
Vehicles with manual transmission do not have a 
secondary air injection system. For this reason 
are on vehicles with manual transmission the 
following components Secondary Air Injection 
(AIR) Solenoid Valve -N112 and Secondary Air 
Injection (AIR) Pump Relay -J299 not displayed. 
     
- 
Press button.Output Diagnostic Test Mode Secondar
y Air 
(AIR
) Injection valve -N112
    
Indicated on display  
This solenoid valve will continue to be actuated (i.e. will click) until the   
button is pressed to advance the program to the next control element.  
If the secondary air injection valve does not click:  
 Repair Manual, 2.7 Liter V6 5V BiTurbo Engine Mechanical, Engine Code(s): APB, Repair Group 26, Checking secondary air injection valve
   
-  Check Secondary Air Injection (AIR) Solenoid Valve -N112
Pa
ge 97 of 166 Motronic s
ystem, On Board Dia
gnostic 
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1 
Page 98 of 166

01-80
      
Actuating Secondary Air Injection (AIR) Pump 
Relay -J299  
     
Note:  
     Only vehicles with automatic transmission are 
equipped with a secondary air injection system. 
Vehicles with manual transmission do not have a 
secondary air injection system. For this reason is 
on vehicles with manual transmission the 
following component Secondary Air Injection 
(AIR) Pump Relay -J299 not displayed. 
     
- 
Press button.Output Diagnostic Test Mode Secondar
y air pump rela
y -J299
    
Indicated on display  
If the Secondary Air Injection (AIR) Pump Motor -V101- does not run at 
intervals:  
 Repair Manual, 2.7 Liter V6 5V BiTurbo Engine Mechanical, Engine Code(s): APB, Repair Group 26, Checking Secondary Air Injection (AIR) Pump Relay 
-J299
       The Secondary Air Injection (AIR) Pump Relay -J299- activates the 
Secondary Air Injection (AIR) Pump Motor -V101-, which runs for 
approx: 1 minute at intervals. 
-  Check Secondary Air Injection (AIR) Pump Relay -J299.
Pa
ge 98 of 166 Motronic s
ystem, On Board Dia
gnostic 
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1