belt AUDI A4 1998 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual

[x] Cancel search | Manufacturer: AUDI, Model Year: 1998, Model line: A4, Model: AUDI A4 1998 B5 / 1.G
Pages: 20, PDF Size: 0.39 MB
AUDI A4 1998 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual A4 1998 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/941/w960_941-0.png AUDI A4 1998 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual
Search: (reset sun roof, sport mode, spare tire, garage door opener, tow, air bleeding)

Page 6 of 20

AUDI A4 1998 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-52 Removing Engine in vehicle Lock carrier must be in service position Page 13 -1 . - Remove toothed belt Page 13 -40 . - Unbolt stop for torque reaction su

Page 7 of 20

AUDI A4 1998 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-53 - Before applying oil seal extractor, thread central bolt for toothed belt sprocket into crankshaft as far as it will go. - Remove inner section of oil seal extractor 3203 one

Page 8 of 20

AUDI A4 1998 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-54 Installing Note: Do not lubricate sealing lip or outer circumference of seal before pressing in. - Place guide sleeve T10053/1 onto crankshaft journal. - Slide oil

Page 9 of 20

AUDI A4 1998 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-55 - Replace central bolt for toothed belt sprocket. Note: Tightening torque 1) Replace bolt 2) 90 corresponds to a quarter turn - Remove crankshaft toothed belt sprocket. To do

Page 11 of 20

AUDI A4 1998 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-57 Removing Engine in vehicle Lock carrier must be in service position Page 13 -1 . - Remove toothed belt Page 13 -40 . CAUTION! The air conditioner

Page 12 of 20

AUDI A4 1998 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-58 - Remove toothed belt sprocket from crankshaft. To do this, counter hold sprocket with 3415. - Remove oil pan Page 17 -11 - Remove bolts -1 to 6-. - Pry sealing flange loose

Page 15 of 20

AUDI A4 1998 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-61 - Install crankshaft oil seal Page 13 -54 . - Install toothed belt (adjust valve timing) Page 13 -44 . - Install bracket for A/C compressor -Item 5 -, Page 13 -1
Search: (height adjustment, child restraint, lights, lane assist, check transmission fluid, headrest)