lock AUDI A4 1998 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual

AUDI A4 1998 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual A4 1998 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/941/w960_941-0.png AUDI A4 1998 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual

Page 2 of 20

AUDI A4 1998 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-48
 
  
3 - 
Sealing ring 
Replacing  Page 13
-51
Do not oil sealing lip of oil seal
4 - 
Sump Removing and installing   Page 17
-11
5 - 
15 Nm 
6 - 
Cylinder block 
Removing and installing cranksh

Page 4 of 20

AUDI A4 1998 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-50
 
  
10 - 
15 Nm 
11 - 
Rear sealing flange with oil seal 
With gasket for cylinder blockDo not oil sealing lip of oil sealMake sure that the sealing lip of the sealing 
ring is not folded back

Page 6 of 20

AUDI A4 1998 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-52
      
Removing  
     
Engine in vehicle 
     Lock carrier must be in service position   
Page 13
-1 . 
     
-  Remove toothed belt   Page 13
-40
 .
    
-  Unbolt stop for torque reaction su

Page 7 of 20

AUDI A4 1998 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-53
      
-  Before applying oil seal extractor, thread central 
bolt for toothed belt sprocket into crankshaft as 
far as it will go. 
     
-  Remove inner section of oil seal extractor 3203 
one

Page 9 of 20

AUDI A4 1998 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-55
      
-  Replace central bolt for toothed belt sprocket.
    
Note: 
Tightening torque  1) Replace bolt  2) 90 corresponds to a quarter turn   -  Remove crankshaft toothed belt sprocket. To do

Page 11 of 20

AUDI A4 1998 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-57
      
Removing  
     
Engine in vehicle 
     Lock carrier must be in service position   
Page 13
-1 . 
     
-  Remove toothed belt   Page 13
-40
 .
     
CAUTION! 
     
The air conditioner

Page 12 of 20

AUDI A4 1998 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-58
 
    
-  Remove toothed belt sprocket from crankshaft. To do this, counter hold 
sprocket with 3415. 
-  Remove oil pan   Page 17
-11
    
-  Remove bolts -1 to 6-. 
-  Pry sealing flange loose

Page 15 of 20

AUDI A4 1998 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual 13-61
      
-  Install crankshaft oil seal   Page 13
-54
 .
     
-  Install toothed belt (adjust valve timing)   Page 
13
-44
 . 
     
-  Install bracket for A/C compressor -Item 5 -,   
Page 13
-1