belt AUDI A4 1998 B5 / 1.G AWM Engine Valve Gear Service Workshop Manual

AUDI A4 1998 B5 / 1.G AWM Engine Valve Gear Service Workshop Manual A4 1998 B5 / 1.G AUDI AUDI https://www.carmanualsonline.info/img/6/945/w960_945-0.png AUDI A4 1998 B5 / 1.G AWM Engine Valve Gear Service Workshop Manual

Page 15 of 58

AUDI A4 1998 B5 / 1.G AWM Engine Valve Gear Service Workshop Manual 15-51
      
Removing  
     
Cylinder head installed 
     Lock carrier must be in service position   
Page 13
-1 . 
    
-  Remove engine cover -arrows-.
-  Remove upper toothed belt guard   Page 13

Page 16 of 58

AUDI A4 1998 B5 / 1.G AWM Engine Valve Gear Service Workshop Manual 15-52
 
    
-  Set crankshaft to markings for TDC of No. 1 cylinder by turning central 
bolt on crankshaft sprocket in direction of rotation -arrows-. 
    
Note:  
Only tension piston of tensioner u

Page 19 of 58

AUDI A4 1998 B5 / 1.G AWM Engine Valve Gear Service Workshop Manual 15-55
 
    
-  Install camshaft sprocket. 
 
Note correct installation position: Narrow web of camshaft sprocket 
faces outward -arrows- and marking for No. 1 is visible from front. 
-  Install secur

Page 20 of 58

AUDI A4 1998 B5 / 1.G AWM Engine Valve Gear Service Workshop Manual 15-56
      
-  Install toothed belt (adjust valve timing)   Page 
13
-44
 . 
     
Note:  
     Observe all instructions on removing and 
installing the toothed belt   Page 13
-40
 . 
     
Tightenin

Page 22 of 58

AUDI A4 1998 B5 / 1.G AWM Engine Valve Gear Service Workshop Manual 15-58
      
Removing  
     
Cylinder head installed 
     Lock carrier must be in service position   
Page 13
-1 . 
    
-  Remove engine cover -arrows-.
-  Remove upper toothed belt guard   Page 13

Page 25 of 58

AUDI A4 1998 B5 / 1.G AWM Engine Valve Gear Service Workshop Manual 15-61
      
Installing sealing ring with spring: 
     
Note:  
     Do not oil sealing lip of oil seal. 
    
All models:  -  Place guide sleeve 3241/2 onto camshaft journal.
-  Slide oil seal over

Page 28 of 58

AUDI A4 1998 B5 / 1.G AWM Engine Valve Gear Service Workshop Manual 15-63
      
Removing  
     
Cylinder head installed 
     Lock carrier must be in service position   
Page 13
-1 . 
    
-  Remove engine cover -arrows-.
-  Remove combination valve for secondary ai

Page 29 of 58

AUDI A4 1998 B5 / 1.G AWM Engine Valve Gear Service Workshop Manual 15-64
 
    
-  Set crankshaft to markings for TDC of No. 1 cylinder by turning central 
bolt on crankshaft sprocket in direction of rotation -arrows-. 
-  Remove cylinder head cover   Page 15
-15
 .

Page 37 of 58

AUDI A4 1998 B5 / 1.G AWM Engine Valve Gear Service Workshop Manual 15-72
 
    
Note:  
When turning the camshaft the crankshaft must not be at TDC. There is a 
danger of damage to the valves/piston crown. 
Note:  -  Align markings on camshaft sprocket with marking o