automatic transmission AUDI A4 1998 B5 / 1.G Brakes Output DTM 03 Workshop Manual
[x] Cancel search | Manufacturer: AUDI, Model Year: 1998, Model line: A4, Model: AUDI A4 1998 B5 / 1.GPages: 66, PDF Size: 0.34 MB
Page 20 of 66

01-166
      
Electrical testing
 
     
If the On Board Diagnostic (OBD) sequence 
does not provide any indication of the source of 
the malfunction, work through all of the 
electrical test steps. 
     If the OBD sequence identifies the source of the 
malfunction, only carry out the test steps 
recommended in the DTC table (specific 
testing). 
     
Test requirements  
     The "Automatic Test Sequence" was carried 
out and it was determined that the 
Transmission Control Module (TCM) and 
Engine Control Module (ECM) only contain 
DTCs relating to ABS/EDL. 
     
  -  Connect the VAG1551 Scan Tool (ST) and 
select the address word 00 with ignition 
switched on; 
     
  -  After completing electrical test, check and 
erase DTC memories of Transmission Control 
Module (TCM) and Engine Control Module 
(ECM). 
Pa
ge 20 of 66 Out
put Dia
gnostic Test Mode 
(DTM
) (function 03
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.13 
Page 37 of 66

01-182
 
Function test: Red brake warning symbol  
Test step  
VAG  
1598/20 
sockets  Test of  
Test requirements 
- Additional work stepsSpecified value  
Corrective action  
9  
  
Continuation:     Function of red 
"brake system 
malfunction" 
symbol  - Connect VAG1551 scan 
tool and select address 
word 03 
- For vehicles with 
automatic transmission and 
high-line instrument cluster, 
depress the brake pedal 
and select a driving gear. The ABS indicator lamp 
and the red "brake system 
malfunction" symbol light 
up. If the traction control 
indicator light is installed 
and OK, it also lights up.   Repair Manual, 
Electrical Equipment, Repair Group 90; instrument cluster.
 
  - Malfunction in 
instrument cluster 
Pa
ge 37 of 66 Out
put Dia
gnostic Test Mode 
(DTM
) (function 03
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.13 
Page 59 of 66

01-199
 
DTC  
Possible cause  
Corrective action  
Printed output from 
VAG1551 Scan Tool 
(ST)    
  
00623        
ABS / transmission 
electrical connection  
 
This malfunction only 
occurs if vehicle is 
equipped with ASR. Data is transferred between the ABS control 
module -J104- and the Transmission Control 
Module (TCM) via a single wire.  For more information, see the section 
"Systems related to ASR"   page 01
-42
 
and the table "Control module versions"   
page 01
-134
 .  
  
Manual transmission    
  
 
ABS/EDL/ASR control module -J104- 
incorrectly coded. 
 Short circuit to B+
 Electrical Wiring Diagrams, 
Troubleshooting & Component Locations    - Check coding of ABS/EDL/ASR control 
module -J104-   page 01
-135
 . 
- Locate and repair short circuit.
  
Automatic transmission    
  
 
ABS/EDL/ASR control module -J104- 
incorrectly coded. 
 Open circuit or short circuit to Ground (GND) 
in wiring between ABS/EDL/ASR control 
module -J104- and Transmission Control 
Module (TCM) -J217-. 
 Electrical Wiring Diagrams, 
Troubleshooting & Component Locations    - Check coding of ABS/EDL/ASR control 
module -J104-   page 01
-135
 . 
- Locate and repair open circuit or short 
circuit. 
Pa
ge 59 of 66 Out
put Dia
gnostic Test Mode 
(DTM
) (function 03
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.13 
Page 63 of 66

01-203
 
DTC  
Possible cause  
Corrective action  
Printed output from 
VAG1551 Scan Tool (ST)    
  
01044        
Control module incorrectly 
coded  
 
This malfunction only 
occurs if vehicle is 
equipped with ASR. Data is transferred between the ABS control 
module -J104- and the Transmission Control 
Module (TCM) via the CAN-bus.  For more information, see the section 
"Systems related to ASR"   page 01
-42
 and 
the table "Control module versions"   page 
01
-134
 .  
  
 
The ABS control module (w/EDL) -J104- is 
coded for a vehicle with manual 
transmission. The vehicle is equipped with 
automatic transmission. - Code the ABS control module (w/EDL) -
J104- for the correct transmission   page 
01
-135
 . 
01130        
ABS operation  
Implausible signal    
- Replace the ABS control module (w/EDL) -
J104- after conferring with the product 
department of your distributor or with the 
responsible importer. 
Pa
ge 63 of 66 Out
put Dia
gnostic Test Mode 
(DTM
) (function 03
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.13