wheel AUDI A4 1998 B5 / 1.G Brakes Read Mesure Value Block User Guide

01-74

Terminal
Wire connection to component ...
37
Hydraulic unit; activation of ABS solenoid valve relay -J106- 38
Right rear ABS wheel speed sensor -G44- 42
Right front ABS wheel speed sensor -G45-
for vehicles with Front Wheel Drive (FWD) and ABS/EDL/ASR for vehicles with All Wheel Drive (AWD) and ABS/EDL (throttle valve regulation)
44
Traction control (ASR) button
for vehicles with Front Wheel Drive (FWD) and ABS/EDL/ASR
45
TI (Transmission Influence)
for vehicles with Front Wheel Drive (FWD) and ABS/EDL/ASR
46
K-wire 47
Engine Control Module (ECM); AET (Actual Engine Torque)
for vehicles with Front Wheel Drive (FWD) and ABS/EDL/ASR
47
Brake light switch -F-
for vehicles with All Wheel Drive (AWD) and ABS/EDL
48
Brake light switch -F- 50
Battery + (terminal 30) 53
Hydraulic unit; left rear ABS inlet valve -N134-
Pa
ge 19 of 79 Read Measurin
g Value Block
(function 08
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.8

01-78

Resistance measurement: Select measurement range on VAG1526 (2k or 20 k ) Test
step VAG
1598/20
sockets Test of
Test requirements
- Additional work stepsSpecified
value Corrective action
7
9 + 10
1)
2)
35 + 10
3)
5)
36 + 10
4) Left front ABS
wheel speed
sensor -G47-
- Check electrical wiring between
control module and wheel speed
sensor for short circuit to Ground
(GND) or B+
8
15 + 14 1)
3) 4)
42 + 14 2)
5) Right front
ABS wheel
speed sensor
-G45-
Electrical wiring between
control module and
wheel speed sensor OK 400 2300
Electrical Wiring Diagrams,
Troubleshooting & Component
Locations
9 13 + 12 Left rear ABS
wheel speed
sensor -G46-
- If the electrical wiring is OK,
replace the relevant ABS wheel
speed sensor.
10 11 + 38 Right rear
ABS wheel
speed sensor
-G44- Outlets on ABS control module -J104- differ depending on installed equipment
Pa
ge 24 of 79 Read Measurin
g Value Block
(function 08
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.8

1) Only for vehicles with Front Wheel Drive (FWD) and ABS/EDL Bosch 5 2) Only for vehicles with Front Wheel Drive (FWD) and ABS/ASR Bosch 5 3) Only for vehicles with All Wheel Drive (AWD) and ABS/EDL Bosch 5, (ABS) pressure regulation 4) Only for vehicles with Front Wheel Drive (FWD) and ABS Bosch 5 5) Only for vehicles with All Wheel Drive (AWD) and ABS/EDL Bosch 5, throttle valve regulation
Pa
ge 25 of 79 Read Measurin
g Value Block
(function 08
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.8

01-80

Function test
Test
step VAG
1598/20
sockets Test of
Test requirements
- Additional work stepsSpecified
value Corrective action
13
1)
Bridge
1 + 2,
28 + 37 Inlet valve -
N101 and front
left brake line
connection
Ignition on

- for vehicles with
automatic
transmission, engage
neutral position "N"
- Bridge terminals 5 +
28
- Depress brake pedal
and hold.





Left front
wheel can
be rotated
by hand - If the wheel does not rotate, check the
other wheels for free rotation. If yes, then
hydraulic brake lines are mixed-up
(switched). Check brake line connections
and coupling pieces. Make sure every
component is OK. Repeat test step 13.
- If all wheels are blocked, inlet valve is
malfunctioning DTC table page 01
-98
,
DTC 00257.

- Remove bridge 5 +
28.
The left-
front wheel
remains
Pa
ge 27 of 79 Read Measurin
g Value Block
(function 08
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.8

01-81

Function test
Test
step VAG
1598/20
sockets Test of
Test requirements
- Additional work stepsSpecified
value Corrective action
14
1)
Bridge
1 + 2,
28 + 37 Inlet valve -N99-
and front right
brake line
connection
Ignition on

- for vehicles with
automatic
transmission, engage
neutral position "N"
- Bridge terminals 54 +
28
- Depress brake pedal
and hold.





Right front
wheel can
be rotated
by hand - If the wheel does not rotate, check the
other wheels for free rotation. If yes, then
hydraulic brake lines are mixed-up
(switched). Check brake line connections
and coupling pieces. Make sure every
component is OK. Repeat test step 14.
- If all wheels are blocked, inlet valve is
malfunctioning DTC table page 01
-98
,
DTC 00259.

- Remove bridge 54 +
28.
The right-
front wheel
remains
Pa
ge 29 of 79 Read Measurin
g Value Block
(function 08
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.8

01-82

Function test
Test
step VAG
1598/20
sockets Test of
Test requirements
- Additional work stepsSpecified
value Corrective action
15
1)
Bridge
1 + 2,
28 + 37 Inlet valve -
N134- and rear
left brake line
connection
Ignition on

- for vehicles with
automatic
transmission, engage
neutral position "N"
- Bridge terminals 53 +
28
- Depress brake pedal
and hold.





Left rear
wheel can
be rotated
by hand - If the wheel does not rotate, check the
other wheels for free rotation. If yes, then
hydraulic brake lines are mixed-up
(switched). Check brake line connections
and coupling pieces. Make sure every
component is OK. Repeat test step 15.
- If all wheels are blocked, inlet valve is
malfunctioning DTC table page 01
-98
,
DTC 00274.

- Remove bridge 53 +
28.
The left-
rear wheel
remains
Pa
ge 31 of 79 Read Measurin
g Value Block
(function 08
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.8

01-83

Test
step VAG
1598/20
sockets Test of
Test requirements
- Additional work stepsSpecified
value Corrective action
16
1)
Bridge
1 + 2,
28 + 37 Inlet valve -
N133- and rear
right brake line
connection
Ignition on

- for vehicles with
automatic
transmission, engage
neutral position "N"
- Bridge terminals 6 +
28
- Depress brake pedal
and hold.





Right rear
wheel can
be rotated
by hand - If the wheel does not rotate, check the
other wheels for free rotation. If yes, then
hydraulic brake lines are mixed-up
(switched). Check brake line connections
and coupling pieces. Make sure every
component is OK. Repeat test step 16.
- If all wheels are blocked, inlet valve is
malfunctioning DTC table page 01
-98
,
DTC 00273.

- Remove bridge 6 +
28.
The right-
rear wheel
remains
locked.
Pa
ge 33 of 79 Read Measurin
g Value Block
(function 08
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.8

01-85

Function test and check for proper seal
Test step
VAG
1598/20
sockets Test of
Test requirements
- Additional work
steps Specified value
Corrective action
17

Continuation:

Right rear
ABS
outlet
valve -
N135- - Bridge terminals 4 +
28
- Switch on ignition for
max. 10 seconds and
switch off again.
Front Wheel Drive
(FWD):
170 25 bar
All-Wheel Drive
(AWD), pressure
regulation (ABS):
90 25 bar
Left front
traction control
outlet valve -
N169- switchedPressure
increases on
pressure
gauge:
- Pressure relief valve and/or left
front ABS outlet valve -N102-
and/or right rear ABS outlet valve
-N135- malfunctioning. Replace
ABS hydraulic unit -N55-.

- Remove VAG1310A
pressure gauge and
bleed brakes All Wheel Drive
(AWD), throttle
valve regulation:
170 25 bar

Pa
ge 37 of 79 Read Measurin
g Value Block
(function 08
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.8

01-87

Function test and check for proper seal
Test step
VAG
1598/20
sockets Test of
Test requirements
- Additional work
steps Specified value
Corrective action
18

Continuation:

Left rear
ABS
outlet
valve -
N136- - Bridge terminals 27
+ 28
- Switch on ignition for
max. 10 seconds and
switch off again.
Front Wheel Drive
(FWD):
170 25 bar
All-Wheel Drive
(AWD), pressure
regulation (ABS):
90 25 bar
Right front
traction control
outlet valve -
N167- switchedPressure
increases on
pressure
gauge:
- Pressure relief valve and/or right
front ABS outlet valve -N100-
and/or left rear ABS outlet valve -
N136- malfunctioning. Replace
ABS hydraulic unit -N55-.

- Remove VAG1310A
pressure gauge and
bleed brakes All Wheel Drive
(AWD), throttle
valve regulation:
170 25 bar

Pa
ge 41 of 79 Read Measurin
g Value Block
(function 08
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.8

01-103

Output on printer of
VAG1551 Scan Tool
(ST) Possible cause
Corrective action
DTC
00283
Left front ABS wheel
speed sensor -G47-
or:
ABS wheel speed sensor rotor dirty or
damaged.
Excessive wheel bearing play.
Left rear ABS wheel speed sensor -G47-
installed incorrectly.
ABS wheel speed sensor -G47-
malfunctioning.
Short circuit to Ground (GND). Repair Manual, Brake System, Repair Group 45

Repair Manual, Suspension, Wheels, Steering,
Repair Group 40

Repair Manual, Brake System, Repair Group 45
- Check rotor, clean or replace
- Replace wheel bearing- Check installation of ABS wheel speed sensor.- "Read measuring value block" display group 1
page 01
-63
.
- Carry out "Electrical test", step 7 page 01
-68
.
- If neither the "Read measuring value block"
function nor the "electrical test" reveal any
malfunctions, check all wiring and harness
connectors for loose contacts.
Left front ABS wheel
speed sensor -G47-
Incorrect control module version.- Check control module version page 01
-52
.
Pa
ge 58 of 79 Read Measurin
g Value Block
(function 08
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.8