stop start AUDI A4 1998 B5 / 1.G Cruise Control System Workshop Manual

27-51

Actuator linkage, adjusting


4-cylinder engines
Depending on the engine, only the installation position of the linkage
varies in the different 4-cylinder engines.
Follow the sequence of operations below:
The play -a- between linkage -2- and actuator -1- must be 0.5-1.0 mm. - Start engine and allow to idle (throttle valve at idle).
-
Screw in linkage -2- up to stop and then turn back one turn (360
90 ). - Secure linkage from moving (locknut).

6-cylinder engines
The adjustment is the same as on the 4-cylinder engine.
The play -a- between linkage -2- and the stop plate on cam plate -1- must
be 0.5-1.0 mm.
- Secure linkage from moving (locknut).
Pa
ge 5 of 10 Cruise control s
ystem, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.27.4