radiator AUDI A4 1998 B5 / 1.G Generator Workshop Manual

27-29


Installing - Release wiring harness from cable tie (arrow).
- Disconnect wire on terminal 30/B+ by removing nut -2-.
Tightening torque: 16 Nm (12 ft lb)
- Disconnect wire on terminal D+ by removing nut -1-.
Tightening torque: 4 Nm (35 in. lb)
- Carefully push radiator hose to side and lift generator up and out.
- To make it easier to install generator onto mount, drive bushing for
mounting bolt back approx. 1 mm.
- Install generator in reverse order of removal.

- Make sure ribbed belt is properly seated and correctly routed.
1 - Without air conditioning
2 - With air conditioning
Pa
ge 4 of 14 Generator, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.27.2