airbag AUDI A4 1998 B5 / 1.G Ignition Switch Lock Cylinder Workshop Manual

94-42

Removing

- Remove driver's-side airbag unit and steering
wheel.

Repair Manual, Body Interior, Repair Group
69


- Remove steering column switches Page 94
-37
.
- Insert spare or shop key and switch ignition on: access hole will appear
in front of switch next to ignition key slot.

Installing - Insert length of steel wire or small screwdriver (approx. 2 mm dia.) as
far as it will go, as illustrated, and pull lock cylinder out of steering lock
housing in direction of arrow.
- Ignition switch must be in "ignition on" position.
-
Push lock cylinder with ignition key all way into steering lock housing
Pa
ge 3 of 7 I
gnition switch lock c
ylinder, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.94.10

94-43

Ignition switch, removing and installing


Removing

Note:
It is not necessary to remove the lock cylinder.

- Disconnect battery Ground (GND) strap.

- Remove driver's-side airbag unit and steering
wheel.

Repair Manual, Body Interior, Repair Group
69


- Remove steering column switche Page 94
-
37
.

- Disconnect harness connector from
ignition/starter switch.

Installing - Remove sealing paint from threads of screws -A-.
- Loosen two screws (arrows -A-) slightly and pull ignition/starter switch
out of housing in direction indicated (arrow).
Pa
ge 5 of 7 I
gnition switch lock c
ylinder, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.94.10