sensor AUDI A4 1998 B5 / 1.G Quattro Fuel Syst
[x] Cancel search | Manufacturer: AUDI, Model Year: 1998, Model line: A4, Model: AUDI A4 1998 B5 / 1.GPages: 55, PDF Size: 0.88 MB
Page 49 of 55
20-100
Note: - Measure resistance at terminals -2- and -3- on cover flange
Sensor
Tank full
Tank empty
Sender for fuel gauge -G
40
280
If fuel level falls between "Tank full" and "Tank empty", resistance
value between the two specified values must be displayed. If 0 or is displayed there is an open or closed circuit in tank
wiring. To check "Tank full" or "Tank empty" resistance values; remove
sender for fuel gauge -G Page 20
-101
and swing sensor float to top
or bottom stop.
Pa
ge 49 of 55 Fuel su
pp
ly system, servicin
g (vehicles with all wheel drive and 1.8 ltr. turbo or 2.8 ltr. en
gine
)
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE04.20.3
Page 51 of 55
20-102
- Carefully pull cover flange out and put to the
side with supply line connected.
- Disconnect harness connector for fuel level
display on inside of cover flange.
Note: - Pull sensor out of surge housing in fuel tank while simultaneously
pressing latching tab -arrow-.
Illustration shows sensor and surge housing for vehicles with Front-
Wheel Drive. For clarity, the surge housing illustration is shown without tank.
Pa
ge 51 of 55 Fuel su
pp
ly system, servicin
g (vehicles with all wheel drive and 1.8 ltr. turbo or 2.8 ltr. en
gine
)
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE04.20.3