wiring AUDI A4 1998 B5 / 1.G Recaro Seats Workshop Manual
[x] Cancel search | Manufacturer: AUDI, Model Year: 1998, Model line: A4, Model: AUDI A4 1998 B5 / 1.GPages: 35, PDF Size: 0.51 MB
Page 9 of 35
72-32
Seat cushion, removing and installing
WARNING!
Before starting work on seats, connect VAS
5094 airbag adapter page 72
-9 .
1 -
Seat cushion
Removing:
- Move seat fully up.
- Remove seat page 72
-25
.
- Remove seat cushion extension, front
cover panel and guide sleeves page
72
-34
.
- Remove trim panels page 72
-41
.
- Remove spring cover page 72
-43
.
- Detach electrical cover -2- under seat.
- If installed, disconnect seat cushion
wiring (seat heater, seat-occupied
sensor).
- Push up front of seat cushion -1-.
- Remove seat cushion -1- forward and
out.
Pa
ge 9 of 35 Recaro seat
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.72.2
Page 10 of 35
72-33
Note:
Both seat springs and their related rubber buffers
located in the rear between the seat cushion and
the backrest fall out by themselves.
Installing:
- Ensure rubber buffers 3 are correctly
located in mountings on backrest.
- Install springs -4- in seat cushion.
- Insert electrical cover -2- between
backrest and seat cushion.
- Install seat cushion -1- so springs -4- sit
on rubber buffers -3- at backrest.
- Push seat cushion -1- toward rear.
- Push down on front of seat cushion -1-.
- If necessary, attach wiring in seat
cushion.
- Install electrical cover beneath seat.
2 -
Electrical cover
3 -
Rubber buffers (2x)
4 -
Springs (2x)
Pa
ge 10 of 35 Recaro seat11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.72.2
Page 11 of 35
72-34
Seat cushion extension, removing and
installing
WARNING!
Before starting work on seats, connect VAS
5094 airbag adapter page 72
-9 .
1 -
Seat cushion extension
Removing:
- Move seat fully up.
- Remove seat page 72
-25
.
- Using pliers or screwdriver push both
springs -2- inward (arrow).
- Remove seat cushion extension -1-.
- If necessary, disconnect seat heater
wiring on both sides.
- Pull front cover -3- up and pull cable
through.
2 -
Springs (2x)
Pa
ge 11 of 35 Recaro seat11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.72.2
Page 13 of 35
72-36
Side seat trim, removing and installing
WARNING!
Before starting work on seats, connect VAS
5094 airbag adapter page 72
-9 .
Note:
It is not necessary to disconnect any wiring when
removing side seat trim on tunnel side. Remainder
of removal procedure is identical to removal of side
seat trim on door sill side.
1 -
Backrest
2 -
Side seat trim, tunnel side
3 -
Bracket for side seat trim, tunnel side
4 -
Seat frame
5 -
Bolts (4x per trim piece)
6 -
Bracket for side seat trim, door sill side
Pa
ge 13 of 35 Recaro seat11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.72.2
Page 14 of 35
72-37
7 -
Side seat trim, door sill side
Removing:
- Move seat fully down.
- Remove seat page 72
-25
.
- Remove mounting trim page 72
-41
.
- Remove seat cushion page 72
-32
.
- Rotate belt buckle downward.
- Disconnect all harness connectors that
run from circuit board to side seat trim on
door sill side.
- Cut all tie wraps on wiring harness using
diagonal cutter.
- Unbolt bolts -5- (4x) on side seat trim.
Installing:
- Attach trim on lower mounting of
backrest frame.
- Secure side seat trim with bolts -4- (4x).
Pa
ge 14 of 35 Recaro seat11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.72.2
Page 17 of 35
72-40
3 -
Switch unit circuit board with wiring
harness
Removing:
- Move seat to bottom-most position.
- Remove seat page 72
-25
.
- Remove door sill side seat trim page
72
-36
.
- Cut all tie wraps on wiring harness using
diagonal cutter.
- Disconnect all wiring harness connectors
to circuit board.
- Remove bolts -2- (4x) at plastic cover -1-
located above circuit board -3-.
- Remove plastic cover -1-.
- Remove bolt -4-.
- Carefully remove circuit board.
Installing:
- Carefully install circuit board so circuit
board contacts seat correctly on contacts
for switch located in side seat trim.
4 -
Bolt (1x)
Pa
ge 17 of 35 Recaro seat11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.72.2