engine oil AUDI A4 1998 B5 / 1.G Refrigerant System Components Workshop Manual

87-21


Refrigerant system (R-134a),
components

A/C compressor


The compressor is driven via a belt on the engine when the A/C clutch
engages (A/C ON).
Low pressure refrigerant gas from the evaporator is compressed by the
compressor. After compression, the refrigerant gas (now high pressure)
flows to the condenser.
The variable displacement A/C compressor varies piston stroke and
output depending on load requirements and suction pressure.
Notes:
Zexel A/C compressors were installed from start of production. During
m.y. 1996, Nippondenso (Denso) type compressors are installed as a
running change. These compressors are not equipped with A/C speed
sensor G111. The compressor contains PAG type refrigerant oil that is mixable
under all temperatures with refrigerant R-134a. A label on the compressor indicates that compressor is for R-134a
systems only.
Pa
ge 1 of 13 Refri
gerant s
ystem
(R-134a
), com
ponents
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.6

87-23


A/C compressor speed sensor -G111-, (Zexel compressors
only)

Note: - Inductive sensor (4 pulses per compressor rotation)
- Determines A/C compressor speed; the A/C compressor clutch control
module (Manual A/C) or the A/C control head (Automatic climate
control) compares compressor speed to engine speed and calculates
belt slippage (as a percentage) and switches compressor OFF if
slippage is too large (for example, if belt is too loose.)
A/C compressor speed sensor -G111- is not installed on Nippondenso
compressors. A thermo-fuse is incorporated into the clutch coil of Nippondenso
compressors. Current to the clutch coil is interrupted in the event of
compressor overheating.
Pa
ge 3 of 13 Refri
gerant s
ystem
(R-134a
), com
ponents
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.6