light AUDI A4 1999 B5 / 1.G 01A Transmission Final Drive Flange Seal Workshop Manual

39-5

Installing

- Fill space between sealing lip and dust lip with
gear oil.

- Lightly oil outer circumference of seal.

Note:
If reinstalling an old drive flange, the new seal must be pressed in about
6.5 mm (0.256 in.), so that the new seal does not sit on the running
surface of the old seal. - Drive in right-hand drive flange seal 5.5 mm (0.216 in.) below outer
transmission housing surface using VW195 arbor, without canting.

Note:
If reinstalling an old drive flange, the new seal must be pressed in about
6.5 mm (0.256 in.), so that the new seal does not sit on the running
surface of the old seal. - Drive in left drive flange seal 5.5 mm (0.216 in.) below outer
transmission housing surface using VW195, without canting.
- Install drive flange using VW295 needle bearing drift.
- Bolt drive axle on drive flange.
Pa
ge 6 of 7 Drive flan
ge seal, re
placin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.39.1